W O L F C O O K T O P V E N T I L A T I O N
P L A N N I N G I N F O R M A T I O N
Wolf downdraft ventilation systems are available in 30" (762), 36" (914) and 45" (1143) widths. The downdraft should be at least as wide as the cooking surface.
Downdraft Model DD30 will fit most 30" (762) wide cabinets, Model DD36 will fit most
36" (914) wide cabinets and Model DD45 will fit most 451/2" (1156) wide cabinets. It is recom- mended that oversized cabinets be used for easier installation. Cabinet backs may need to be removed.
IMPORTANT NOTE: To install a downdraft system and a Wolf cooktop, you must allow for
aminimum 251/8" (638) flat counter space from front to back. A countertop with a raised lip and/or backsplash may not allow enough space for proper installation. 2 3/8" (60) of flat counter- top is required behind the cooktop and 13/4" (44) is necessary between the back edge of the cooktop and inside of cabinet back.
IMPORTANT NOTE: This appliance must be used with a
The
(102)from the outer edge of cooktop element or burner. You will be required to drill three holes and connect the downdraft to the control module with the provided wire.
Specifications on the following pages provide overall dimensions, blower and ducting consider- ations, and installation specifics for downdraft ventilation systems. Also refer to the cooktop ventilation recommendations on pages
If a Model DD30 is installed in combination with two integrated modules, an integrated module support for downdraft ventilation is required. Contact your Wolf dealer for information on accessory components.
O V E R A L L D I M E N S I O N S
Downdraft Systems
Models DD30I / DD30R
Models DD36I / DD36R
Models DD45I / DD45R
30"
(762)
91/16"
(230)261/4"
(667)
11/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
Dimensions in parentheses are in millimeters unless otherwise specified.
23/8"
(60)
91/16"
(230)
36"
(914)
321/4"
(819)
11/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
23/8"
(60)
91/16"
(230)
451/2"
(1156)
411/4"
(1048)
11/2" (38)
DEPTH OF
DOWNDRAFT CHIMNEY
23/8"
(60)
98