●Set the chimney according to the measured height and stop its run with the two fixing screws 2,9x6,5 mm supplied (fig. 6).
6
7
●Fix the chimney to the aesthetic top with two screws 2,9x6,5 mm supplied (fig. 7).
●From the inside of the hood, fix the aesthetic top with four screws M3x6 supplied (Two each side)(fig. 8).
●Fix the upper bracket to the wall, close to the ceiling, perpendicularly to the outlet hole of the hood with 2 screws 5x45 mm (fig. 8).
●Fix the chimney to the bracket with two screws 2,9x6,5 mm (fig. 8).
8
10