AEG 125 D manual Removing the filter, Carbon filter

Page 14

Removing the filter

Open the grid and remove the stops M to take out the filter. See Fig. 6.

Carbon filter

The activated carbon filter should only be used if you want to use the hood in recirculation mode.

To do this you will need an original AEG activated carbon filter (available as an accessory).

This filter cannot be cleaned or reused.

As a general rule, the activated carbon filter should be changed once every four months.

Mounting – Fig 11

a.Fit first rearwards on the proper seats.

b.Then fix frontwards the carbon filter using hooks C.

Dismounting :

Unhook the carbon filter from its housing pushing hooks C.

11

Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the rating plate located on the inside of the unit.

The activated carbon filter can be ordered from AEG Servire Force.

14

Image 14
Contents 125 D Contents Extraction mode IntroductionRecirculation mode Summer/Winter Hood ConversionAppliances with 2 wires Electrical connection for the UKTechnical details Installation Safety warnings for kitchen unit installerPage Wall mounting Page Hood Operation Fixing the shelfSafety warnings for user Grease filter Maintenance and careOpening the grid Removing the filter Carbon filterCleaning Changing the light bulbSpecial accessories Something not working Allow the entry of fresh airService & Spare Parts 0990Page AEG Hausgeräte AG