Warning
●Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.
Changing the light bulb
●Disconnect the unit from the mains power supply.
●Remove the grid.
●Replace the old light bulb with a new light bulb (40 W max.).
●If the light does not come on, make sure the bulb has
been screwed in correctly before contacting AEG Service Force.
Cleaning
●Warning: always disconnect the hood from the mains power supply before cleaning it.
Never insert pointed objects in the motor’s protective grid.
●Wash the outside surfaces using a mild detergent solution. Never use caustic detergents or abrasive brushes or powders.
●Only ever clean the switch panel and filter grille using a damp cloth and delicate detergents.
●It is extremely important to clean the unit and change the filters at the recommended intervals. Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
15