AEG 125 D manual Something not working, Allow the entry of fresh air

Page 17

Something not working

If your cooker hood fails to work properly please carry out the following checks.

Sympton

Solution

 

 

 

The cooker hood will not start...

The hood is connected to the

 

electricity supply.

 

Check that the fan speed control is

 

set to 1, 2 or 3.

 

The cooker hood is not working

The fan speed is set high enough

effectively...

for the task.

 

The grease filter is clean.

 

The kitchen is adequately vented to

 

allow the entry of fresh air.

 

If set up for recirculation, check that

 

the charcoal filter is still effective.

 

If set up for extraction, check that

 

the ducting and outlets are not

 

blocked.

The cooker hood has switched off

The safety cut-out service has been

 

during operation...

tripped.

 

Turn off the hob and then wait for the

 

device to reset.

 

 

 

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number.

Please note that it will be necessary to provide proof of purchase for any in- guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

17

Image 17
Contents 125 D Contents Introduction Extraction modeSummer/Winter Hood Conversion Recirculation modeElectrical connection for the UK Appliances with 2 wiresTechnical details Safety warnings for kitchen unit installer InstallationPage Wall mounting Page Fixing the shelf Hood OperationSafety warnings for user Grease filter Maintenance and careOpening the grid Carbon filter Removing the filterChanging the light bulb CleaningSpecial accessories Allow the entry of fresh air Something not working0990 Service & Spare PartsPage AEG Hausgeräte AG