Introduction
Extraction mode
●The hood is supplied as an extractor unit and can also be used as a filtered function (recirculation) by fitting activated carbon filters (available as an accessory).
●The unit features two outlet holes, one of which A is located on the top of the unit while the other B is located on the rear.
●To connect up the hose, you should first fit the
Close off the unused hole using the bayonet fitting caps D.
1
D
A
B
C
C
A
B
D
●Important! To use the back hole B, remove switch F from the
top hole. — Fig 2.
2
3