Seagate 1080SL manual Mounting the drive, Mounting hole locations

Medalist 1080sl SCSI Installation Guide, August 1995 11

Mounting the drive

Required materials:

∙Four 6-32 UNC-2A screws (not included)

The drive fits in the standard 3.5-inch bay and can be mounted in any orientation. Position the drive so that the cables are not strained or crimped. Secure it with four mounting screws not more than 6 full turns (0.20 inches) into the drive frame (see Figure 3).

Caution. To prevent drive mounting-hole damage, use only the type of screws specified.

Figure 3. Mounting hole locations