Seagate 1080SL manual NonDOS operating systems, Network installation

Page 17

Medalist 1080sl SCSI Installation Guide, August 1995

15

 

 

 

NonDOS operating systems

If you are installing the drive in a system that is using an operating system other than DOS, you may need a device driver or instal- lation software. The device driver is provided by your SCSI adapter manufacturer and is operating-system specific. It is pro- vided on a diskette that comes with the adapter. Refer to the SCSI adapter’s documentation for instructions on how to install the device driver. If you do not have a device driver for the operating system you want to install, contact the SCSI adapter manufac- turer.

Installation software may be required to install the drive in some systems. There are many reputable third-party installation soft- ware packages available. Consult your dealer to determine the best package for your needs.

Some operating systems require that you low-level format the drive. A low-level format routine is usually supplied on the SCSI adapter. Refer to your SCSI adapter’s documentation for instruc- tions on using the low-level format routine.

Network installation

If you are installing the drive in a network environment, you may need to configure your SCSI host adapter for network operation. Refer to your SCSI adapter’s user guide for assistance preparing the SCSI adapter and installing the drive.

If you have trouble installing the drive with the network software, try installing it with DOS to ensure that the drive is working correctly.

Image 17
Contents Medalist 1080sl Scsi Interface Drive Contents Introduction Drive features Read before you begin Medalist 1080sl Scsi Installation Guide, August Required materials Configuring the driveConnector and jumper block locations Options jumper settings Medalist 1080sl Scsi Installation Guide, August Medalist 1080sl Scsi Installation Guide, August Attaching cables Attach an available power cable to the driveMounting hole locations Mounting the driveLow-level formatting Configuring the drive and computerSystem setup configuration Partitioning High-level formatting NonDOS operating systems Network installationBasic troubleshooting Medalist 1080sl Scsi Installation Guide, August Advanced troubleshooting Screen stays blank when you power up the system System error message, Drive not Ready, appearsFdisk error message, No Fixed Disk Present, appears Location Modem number Technical support servicesSeaBOARD Location Telephone number SeaFAXSeagate Technical Support FAX /438-8137 SeaFONE /438-8222Seagate’s Internet connections SeaTDD /438-5382Seagate CompuServe forum Drive in an approved package Storing and shipping your drive
Related manuals
Manual 40 pages 58.08 Kb