MAINTENANCE
CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.
For the optimal level of operation, clean the range hood surface, safety screens, containers regularly.
To Clean Hood Surface
CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.
***Regular care will help preserve its fine appearance.
1)Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2)If hood looks splotchy (stainless steel hood), use an orange base cleaner to surface of the hood. Avoid cleaner to get on the control switches. Only spr coating over the surface of the hood and leave on for a few minutes (do not l long or this may cause damage to hood finish). Use soft towel to wipe off th solution, gently rubs any stubborn spots. Use a slightly damp towel to get r cleaning solution. Use dry soft towel to dry the hood.
3)To bring the glow back into a stainless steel finish, use a stainless steel
4)DO NOT allow deposits to remain for long periods of time.
5)DO NOT use ordinary steel wool or steel brushes. Small bits of steel may ad surface causing rust.
6)DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds in contact with stainless steel for extended periods. Many of these compound chemicals, which may be harmful. Rinse with water after exposure and wipe dr clean cloth.
To Clean Oil Containers, Safety Screens, and Impellers
CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW.
1)Normal Cleaning
-Turn on high speed and spray a mild degreaser into the fan. Liquid resid accumulate in the oil containers.
2)Cleaning Oil Containers
-Remove the oil container (round) by turning
-Remove the oil container (oval) by sliding forward.
-Wash with warm soapy water. Dry completely before returning into place.
-Top rack dishwasher safe.
3)Cleaning Safety Screens
-Remove the safety screen screw and slide the safety screen out.
-Wash with warm soapy water. Dry completely before returning into place.
-Top rack dishwasher safe.
12