Kobe Range Hoods RA3836S, RA3830S Replace protective cover Plug in range hood

Page 15

To Replace Light Bulb

CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

1)Make sure all control switches are off, and range hood is unplugged.

2)Use a flat head screwdriver to pop out the protective covering as shown in F

3)Gently pull out the defective light bulb and discard. Light bulbs should b maximum. Refer to Figure 19. Push bulb securely into light socket.

4)Replace protective cover.

5)Plug in range hood.

Figure 18

Figure 19

13

Image 15
Contents Kobe Brand Range Hood Read and Save These Instructions Important Safety Instructions Please Read this Section Carefully Before InstallationWhat to Do In The Event Of a Range Top Grease Fire Activating any switch may cause ignition or an explosionComponents of Package For Stand Alone with Optional Duct Cover InstallationPlease Read Entire Instructions Before Proceeding For Under the CabinetPreparation before Installation Under the Cabinet Installation Safety WarningSafety Warning Connect the electrical wires Stand Alone Installation Page Attach Together Wiring to Power Supply Final AssemblyCheck all lights and fan operation. for the homeowner Operating Instructions Top rack dishwasher safe MaintenanceReplace protective cover Plug in range hood Specifications Measurements & Diagrams All measurements in are millimetersHood-Mounting Bracket Parts List Model NO. RA3830SOptional Duct Cover Model NO. RA3830S KEY Code Circuit DiagramClaims will not be Accepted After the Allocated Days DisclaimerThis warranty applies only Within U.S.A. and Canada WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodService Consequential DamageMAY not Apply to YOU Implied WARRANTIES/STATE LAW Model No Product RegistrationRegister Your Product Record the Following Information for Your Record