Glass Information, Louvre Removal | Vermont Casting 360DVSL specification

360DVS Series Direct Vent Fireplaces

Operating Instructions

Glass Information

Only glass approved by CFM Corporation should be used on this ﬁreplace.

•The use of any non-approved replacement glass will void all product warranties.

•Care must be taken to avoid breakage of the glass.

•Do not operate appliance with glass front removed, cracked or broken.

•Replacement glass (complete with gasket) is available through your Majestic Fireplaces dealer and should only be installed by a licensed qualiﬁed service person.

Louvre Removal

•The top side and top end louvres are removed by simply lifting the louvre assembly and pulling the as- sembly away from the ﬁreplace. (Fig. 36)

•The lower side louvres are hinged along there lower edge and are folded down for access to components in the base cavity of the ﬁreplace.

•The lower end louvre assembly on the 360DVS3/ SL/ SR units is removed in the same manner as the top louvre assemblies.

Louvre

Glass Panel

FP1227

Fig. 36 Remove louvre assembly top.

Window Frame Assembly Removal

Side Window Frame Assemblies

1.Shut off the gas supply.

2.Allow the ﬁreplace to cool if it has been in operation.

3.Remove the top louvre assembly.

4.Lower the bottom louvre assembly.

5.Release the two clamps along lower edge of the frame by pulling down on clamp handles. (Fig. 37)

6.Tilt lower edge of frame out slightly and lift window frame assembly up and away from the ﬁreplace.

7.To reinstall the window frame assembly reverse this procedure.

Front Window Frame Assembly

1.Remove the top and bottom louvre assembly.

2.Remove the lower window trim (held in place with magnets).

3.Remove both lower retaining screws. Access to these screws is gained through the holes along the lower edge of the frame behind the trim. (Fig. 38)

4.Tilt lower edge of frame out slightly and lift window frame assembly up and away from the ﬁreplace.

5.To reinstall the window frame assembly reverse the process.

	Lower Clamps
		Window
	Window	Frame
	Window	Assembly
	Frame
	Assembly	Pull Clamp
	Push	Pull Clamp
	Push	Hook
	Clamp

Han-

FP1228

Fig. 37 Window frame assembly removal.

Location of Lower

Retaining Screws

FP1445

Fig. 38 Retaining screw.

10006326

360DVS3, 360DVSL, 360DVSR, 360DVS2 specifications

Vermont Casting offers a range of high-quality gas stoves designed to enhance home heating and add aesthetic appeal. Among their most popular models are the 360DVSR, 360DVSL, 360DVS2, and 360DVS3. Each of these models features unique characteristics and innovative technologies that set them apart in the world of home heating.

The 360DVSR is a versatile choice known for its superb efficiency and heating capabilities. This model employs advanced technology to ensure optimal performance, featuring a heat exchanger that maximizes heat transfer while minimizing fuel consumption. The DVSR boasts a stunning design with a wide viewing area, allowing users to enjoy the mesmerizing flames. Its easy-to-use electronic ignition ensures that lighting the stove is hassle-free, and it also comes with remote control options for added convenience.

The 360DVSL, on the other hand, is tailored for those seeking a more contemporary aesthetic. This model offers the same outstanding energy efficiency as the DVSR but incorporates a sleek, low-profile design that fits seamlessly with modern interiors. Its programmable thermostat allows users to maintain their desired temperature easily, while the dual-fuel capability enables the use of either natural gas or propane. The 360DVSL is perfect for families looking to combine style with function.

For larger spaces, the 360DVS2 and 360DVS3 are optimal choices. These models are designed with a greater heating capacity, making them suitable for larger rooms or open-concept living spaces. The 360DVS2 features a dual burner system that allows for variable heat output, improving comfort in varying conditions. It also includes a realistic log set that adds to the ambiance of the flame.

Meanwhile, the 360DVS3 distinguishes itself with a three-sided design, offering a panoramic view of the fire from multiple angles. This makes it a stunning focal point in any room. Each model is built with durable materials and features Vermont Casting’s renowned craftsmanship, ensuring longevity and reliability.

In summary, Vermont Casting's range of 360DVSR, 360DVSL, 360DVS2, and 360DVS3 gas stoves combine advanced technology, efficiency, and timeless design. Whether you are looking for versatility, contemporary style, or higher heating capacity, these models offer a solution to meet varied needs while enhancing any living space with the warm ambiance of a gas fire.