Cleaning Standing Pilot Control System | Vermont Casting 360DVSL

360 DVS Series Direct Vent Fireplaces

Maintenance

Burner and Burner Compartment

It is important to keep the burner and the burner com- partment clean. At least once per year remove the logs and lava rock/ember material. Vacuum and wipe out the burner compartment. Remove and reﬁt the logs per the instructions in this manual.

Always handle the logs with care as they are fragile and may also be hot if the ﬁre-

place has been in use. FK24/FK12 Fan Assembly

The fan unit requires periodic cleaning. At least once per month in the operating season, open the lower lou- vre panels and wipe or vacuum the area around the fan to remove any build up of dust or lint.

Brass Trim

Clean the brass trim pieces using a soft cloth lightly dampened with lemon oil. Do not use water or house- hold cleaners on any brass components.

Cleaning the

Standing Pilot Control System

The burner and control system consists of:

•	burner tube	•	gas oriﬁce
•	pilot assembly	•	thermopile
•	millivolt gas valve

Most of these components may require only an occa- sional checkup and cleaning and some may require ad- justment. If repair is necessary, it should be performed by a qualiﬁed technician.

1.Turn off pilot light at gas valve side.

2.Let ﬁreplace cool if it has been running.

3.Remove window frame assembly. (Refer to Window Frame Assembly Removal section)

4.Remove logs.

5.Vacuum burner compartment especially around oriﬁce primary air openings.

6.Visually inspect pilot. Brush or blow away any dust or lint accumulation.

7.Reinstall logs.

8.Ignite pilot; refer to Lighting Instructions.

9.Reinstall window frame assembly.

To obtain proper operation, it is imperative that the pilot and burner’s ﬂame characteristics are steady, not lifting or ﬂoating.

Typically, the top 3/8 – 1/2” (10 – 13 mm) of the thermo- pile should be engulfed in the pilot ﬂame. (Page 26, Fig. 46)

To adjust pilot burner (to be done by a qualiﬁed service technician):

1.Remove pilot adjustment cap.

2.Adjust pilot screw to provide properly sized ﬂame.

3.Replace pilot adjustment cap.

The primary air shutter is set at factory and should be adjusted, if necessary, only by a qualiﬁed service tech- nician.

Cleaning Electronic Ignition System

The Electronic Ignition burner/control system consists of:

•main burner

•gas oriﬁce

•pilot burner

•24VAC valve with transformer

The process for taking care of Electronic Ignition units is identical to that for taking care of Standing Pilot models.

10006326

360DVS3, 360DVSL, 360DVSR, 360DVS2 specifications

Vermont Casting offers a range of high-quality gas stoves designed to enhance home heating and add aesthetic appeal. Among their most popular models are the 360DVSR, 360DVSL, 360DVS2, and 360DVS3. Each of these models features unique characteristics and innovative technologies that set them apart in the world of home heating.

The 360DVSR is a versatile choice known for its superb efficiency and heating capabilities. This model employs advanced technology to ensure optimal performance, featuring a heat exchanger that maximizes heat transfer while minimizing fuel consumption. The DVSR boasts a stunning design with a wide viewing area, allowing users to enjoy the mesmerizing flames. Its easy-to-use electronic ignition ensures that lighting the stove is hassle-free, and it also comes with remote control options for added convenience.

The 360DVSL, on the other hand, is tailored for those seeking a more contemporary aesthetic. This model offers the same outstanding energy efficiency as the DVSR but incorporates a sleek, low-profile design that fits seamlessly with modern interiors. Its programmable thermostat allows users to maintain their desired temperature easily, while the dual-fuel capability enables the use of either natural gas or propane. The 360DVSL is perfect for families looking to combine style with function.

For larger spaces, the 360DVS2 and 360DVS3 are optimal choices. These models are designed with a greater heating capacity, making them suitable for larger rooms or open-concept living spaces. The 360DVS2 features a dual burner system that allows for variable heat output, improving comfort in varying conditions. It also includes a realistic log set that adds to the ambiance of the flame.

Meanwhile, the 360DVS3 distinguishes itself with a three-sided design, offering a panoramic view of the fire from multiple angles. This makes it a stunning focal point in any room. Each model is built with durable materials and features Vermont Casting’s renowned craftsmanship, ensuring longevity and reliability.

In summary, Vermont Casting's range of 360DVSR, 360DVSL, 360DVS2, and 360DVS3 gas stoves combine advanced technology, efficiency, and timeless design. Whether you are looking for versatility, contemporary style, or higher heating capacity, these models offer a solution to meet varied needs while enhancing any living space with the warm ambiance of a gas fire.