B)TO SET THE TIMER TO SWITCH OFF ONLY
i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 10.00am as Fig. 9.
ii)Place food in oven.
iii)To set the length of cooking time, press the Selector Control button until the 'Cook Time' ( 
) indicator is illuminated. Press the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 10. Depress the decrease control ( - ) if necessary.
iv) Release | the buttons. The 'Cook Time' indicator | |
( | ) | will illuminate and the time of day will be |
displayed after 5 seconds.
v)Set the oven temperature. The oven indicator neon should be ON.
vi)To check the 'End Time' during the cooking period, simply press the Selector Control button once and the remaining time will be displayed, as Fig. 11.
4.TO CANCEL AN AUTOMATIC PROGRAMME
i)To cancel an automatic programme press the Selector Control button until the 'Cook Time' indicator (
) neon flashes. Press the decrease control ( - ) until the display reads 0.00 as Fig. 12.
ii) Release the buttons. The 'Cook Time' indicator
( 
) will flash and after 5 seconds return to the time of day.
iii) Turn off oven control.
5.TO RETURN THE APPLIANCE TO MANUAL
At the end of a timed cooking period, the indicator neon will flash and an alarm will sound for up to 2 minutes.
i)To stop the sound press any of the three buttons, as Fig. 13.
ii)The display will return to the time of day.
iii)Turn off the oven controls.
Fig.9.
Fig.10.
Fig.11.
Fig.12.
Fig.13.
12