CLEANING THE TOP OVEN ROOF
The grill element is hinged to make cleaning the oven roof easier.
Switch off the appliance from the electricity supply before cleaning and ensure the oven is cold.
1.Remove the wirework side runners. See below.
2.Undo the two screws which hold the grill element in place.
3.Gently pull the element downwards to allow access to the oven roof. Do not force the element downwards.
4.Clean the top of the oven with Cif cream cleaner and a sponge scourer. If heavily soiled, aerosol oven cleaners may be used following the instructions given above for cleaning the grill / top oven compartment.
5.Gently push the grill element back into place.
6.Fit the screws to hold the element in place and tighten firmly.
7.Replace the wirework side runners.
Ensure the screws are firmly in place after cleaning.
CARE OF THE STAYCLEAN SURFACES
The main oven top, sides and back panel are coated with a special Stayclean coating. They should not be cleaned manually.
Aerosol cleaners must not be used on Stayclean surfaces and must not come into contact with elements or the door seal, as this may cause damage.
During normal use the Stayclean coating will become splashed with fats and food residues. By running the oven without food, the Stayclean surfaces burn off any soilage. Regular use of the oven cleaning cycle will help to keep the panels in good condition.
THE MAIN OVEN CLEANING CYCLE
1.Remove oven shelves and bakeware from oven.
2.Push out and turn the Selector to Fan oven
function. ( | ) |
3.Push out and turn the main oven temperature control to 220°C and allow the oven to run for an hour or so.
THINGS TO NOTE
The main oven neon will illuminate.
The main oven indicator neon will turn on and off during use.
The Cooling Fan for the controls will operate after a short time. It may run on after the controls are switched off until the appliance has cooled. See page 8 for more details on the operation of the cooling fan.
42