Zanussi ZGF 642 manual Important Safety Information, Child Safety, During Use, Service

Page 2

Important Safety Information

You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department

on 01635 521313

Installation

This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards.

Any gas installation must be carried out by a registered CORGI installer.

Remove all packaging before using the hob.

Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe.

Do not attempt to modify the hob in any way.

Child Safety

This hob is designed to be operated by adults. Do not allow children to play near or with the hob.

The hob gets hot when it is in use.

Children should be kept away until it has cooled.

Children can also injure themselves by pulling pans or pots off the hob.

During Use

This hob is intended for domestic cooking only. It is not designed for commercial or industrial purposes.

When in use a gas cooking appliance will produce heat and moisture in the room in which it has been installed. Ensure there is a continuous air supply, keeping air vents in good condition or installing a cooker hood with a venting hose.

When using the hob for a long period time, the ventilation should be improved, by opening a window or increasing the extractor speed.

Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.

Ensure the control knobs are in the ‘OFF’ position when not in use.

When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance.

Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage.

Never leave the hob unattended when cooking with oil and fats.

Never use plastic or aluminium foil dishes on the hob.

Perishable food, plastic items and areosols may be affected by heat and should not be stored above or below the hob unit.

Service

This hob should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.

Environmental Information

After installation, please dispose of the packaging with due regard to safety and the environment.

When disposing of an old appliance, make it unusable, by cutting off the cable.

Keep this instruction book for future reference and ensure it is passed on to any new owner.

3

Image 2
Contents GAS HOB Model ZGF Service Important Safety InformationChild Safety During UseContents Description of the Hob InstallationWhen the HOB is First Installed Hob TopBurner Minimum Maximum OperationHOB Burners DiameterPan Supports Maintenance and CleaningHobTop BurnersSymptom Solution Something Not Working?Peace of Mind for 24 Months Service and Spare PartsZanussi Guarantee Conditions Customer CareOverall Dimensions Instructions for the InstallerEngineer technical data CUT OUT DimensionsImportant safety requirements LocationGas Connection InstallationDimensions are given in mm Cut Out SizeBuilding Fitting the Hob into the worktopElectrical connections This HOB Must be EarthedWiring Diagram Taps Ignitor Switches Ignitor UnitEarth Continuity Check Fault FindingPreliminary Electrical Systems Check Ignition System / Gas Ignition Commissioning ProcedurePressure Testing To Adjust the GAS Rate Servicing