Zanussi ZGF 642 Description of the Hob, Hob Top, Installation, When the HOB is First Installed

Page 4

Description of the Hob

2

3

3

1

5 6 7 8

4

1.Hob Top

2.Auxiliary Burner

3.Semi-rapid Burners

4.Rapid Burner

5.Control knob for front left burner (auxiliary)

6.Control knob for back left buner (semi-rapid)

7.Control knob for back right burner (semi-rapid)

8.Control knob for front right burner (rapid)

INSTALLATION

Any gas installation must be carried out by a registered CORGI installer, and in

accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

5

Image 4

Contents GAS HOB Model ZGF Important Safety Information Child SafetyService During UseContents Installation When the HOB is First InstalledDescription of the Hob Hob TopOperation HOB BurnersBurner Minimum Maximum DiameterMaintenance and Cleaning HobTopPan Supports BurnersSymptom Solution Something Not Working?Service and Spare Parts Zanussi Guarantee ConditionsPeace of Mind for 24 Months Customer CareInstructions for the Installer Engineer technical dataOverall Dimensions CUT OUT DimensionsImportant safety requirements LocationInstallation Dimensions are given in mmGas Connection Cut Out SizeBuilding Fitting the Hob into the worktopElectrical connections This HOB Must be EarthedWiring Diagram Taps Ignitor Switches Ignitor UnitPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Pressure Testing ProcedureCommissioning To Adjust the GAS Rate Servicing