TC electronic SDN BHD Gold Channel user manual Quick Reference

Page 13

QUICK REFERENCE

General Control

General control of the Gold Channel display is accomplished by dialing the Parameter wheel to change position of the cursor, and the Value wheel to change values. In many of the displays you can select different menus by pressing the < > Menu keys, as in the Edit display where you can select between Meter, Edit, Routing and Layout. Press Enter to carry out an action (for example, when recalling a preset).

Recall

Press Programs (if you are not already there) and select Recall with the < > Menu keys. Use the Value wheel to select a preset (Factory, User or Card preset) and press Enter to load the preset.

Quick Store

If you want to store a modified factory preset with the same name, press Programs and use the < > Menu keys to access the Store menu, then press Enter to confirm. The Gold Channel will now automatically store your preset in the first empty User space, using the current name. If you have modified a User preset, the Gold Channel will default to the same User preset number when you try to store it. If you don’t want to overwrite the preset, choose another User or Card bank number with the Value wheel.

Editing

Press the Edit key and select the Edit display using the < > Arrow keys. There are two ways of entering the parameter display of a processing block. Double-click the bypass key of the block you want to edit or dial the Parameter wheel to place the cursor on the block you want to Edit and press Enter. Press the Exit key when you want to return to the Edit display, or double-click on the bypass key.

Routing

Changing the order of the processing blocks is done in the Routing display. Press the Edit key and select the Routing display using the < > Menu keys. Place the cursor where you want to insert a processing block, and dial the Value wheel to select the sub-algorithm (sub-algorithm is shown in the lower text line). Now press Enter to insert the current processing block. Pressing Enter while pointing to a processing block will give you a short-cut to the parameter display of the processing block, and pressing Exit will return you to the Routing display.

Input/Output Levels

When using Analog input, turn the Input encoders at the upper left corner of each channel to adjust the input levels. When adjusting the input level, the Gain display will automatically appear and then disappear again after a few seconds. You must make sure that the Input encoder indication on the display has grabbed the indication on the outer circle which shows the actual input gain. Otherwise, nothing will happen to the input gain.

To access the Digital Input/Output levels and the analog output levels, press the Setup key and select the Level page using the < > Menu keys.

NOTE: The Digital Master Out levels are placed before the Analog output levels, and will therefore have influence on the Analog output levels.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
Gold Channel Page Table of Contents Microphones as Ears ForewordForeword Congratulations WelcomeAbout this Manual Introduction Gold Channel featuresGeneral Introduction Card Slot Front Panel Parameter Wheel Balanced XLR-XLR cables Rear PanelSignal Flow Recording setup Connecting the Gold ChannelPost recording setup Mixer setupQuick Reference Signal Display Setup SignalSignal Display InputClock Insert Send and ReturnDigital External Clock DitherGain Display Setup GainLevel display Setup LevelPrograms Recall Recalling presetsRecall and List Displays Partial RecallExercise 1 How to Recall a preset Press the Programs key Exercise How to Recall a presetTo Recall the Preset List DisplayPrograms Store How to StoreStore Display Store functionTo Store the Preset Exercise 2 How to Store a preset with the existing nameExercise 3 How to name a preset Edit Routing and Layout Setting up the processing blocksColumns and Blocks ModeEditing the digital processing Edit Edit and MeterAbout the Edit Display BlockInsert block OUT BlockLink MeterEasy Gate BlocksAdvanced Expander Hold Knee ModeRelease FilterVintage Compressor Soft CompressorInput Drive Output GainAdvanced Equalizer Easy EqualizerDynamic Equalizer De-EsserA.A. Equalization Digital Radiance GeneratorCurve Utility Config.Utility Display CardMidi How to enter the Reset Menu Reset MenuSelf Test Analog Line Inputs Technical SpecificationsMidi Implementation Chart No sound through the Gold Channel Trouble ShootingFor the customers in Canada CertificationsPreset Description Factory Preset ListPreset Microphones The Inside Story Where Great Recordings BeginChoosing the Right Mic Microphone PlacementStereo Recording Gold Channel
Top Page Image Contents