![](/images/new-backgrounds/1034993/3499371x1.webp)
TECHNICAL SPECIFICATIONS
ANALOG LINE INPUTS |
| Digital Inputs and Outputs |
|
Connectors: | XLR balanced (pin 2 hot) | Connectors: | XLR (AES/EBU), RCA Phono (S/PDIF), Optical |
Impedance (balanced): | 6.8 kOhm |
| (Toslink, ADAT) |
Phantom supply: | Formats: | AES/EBU (24 bit), S/PDIF (20 bit), EIAJ | |
Max. Input Level (balanced): | 22 dBu |
| IEC 958, EIAJ Optical (Toslink), ADAT Lite pipe |
Sensitivity, |
| Output Dither: | HPF TPDF dither |
@ 12 dB headroom (balanced): | - 11 dBu to 10 dBu | Word Clock Input: | RCA Phono, 75 ohm, 0.6 to 10 Vpp, 30 - 50 Khz |
Dynamic Range (unweighted): | > 103 dB | Sample Rates: | 44.1 kHz, 48 kHz |
THD+N: | < | Processing Delay: | 0.2 ms @ 48 kHz |
Frequency Response: | 20 Hz to 20 kHz: | Frequency Response DIO: | 20 Hz to 23.9 kHz |
Crosstalk |
| PCMCIA Interface |
|
(Line to Mic. Pad 0), worstcase: | < |
| |
(Line to Line or Mic. Pad |
| Connector: | PC Card, 68 pin type l cards |
20/40/60), worstcase: | < | Standards: | PCMCIA 2.0, JEIDA 4.0 |
Common Mode Rejection, |
| Card Format: | Supports up to 2 MB SRAM |
RS = 40 Ohm: | > 60 dB @ 50/60 Hz & > 70 dB @ 1 kHz | Control Interface |
|
A to D Conversion: | 24 bit (1 bit, 128 times oversampling) |
| |
A to D Delay: | 0.8 ms @ 48 kHz | MIDI: | In/Out/Thru : 5 Pin DIN |
Analog MiC Inputs |
| GPI, Pedal, Fader: | 1/4" phone jack |
| General |
| |
Connectors: | XLR balanced (pin 2 hot) |
| |
Impedance (balanced): | 6.8 kOhm | EMC Complies with: | EN |
Phantom supply: | 48V +/- 10%, pin 2 & 3 through 6.81 kOhm |
| rules, part 15 |
Max. Input Level (balanced) |
| Safety Certified to: | IEC65, EN 60065, UL 1419, CSA E65 |
Pad 0/20/40/60: | 0: | Operating Temperature: | 32° F to 122° F (0° C to 50° C) |
Sensitivity @ |
| Storage Temperature: | |
12 dB headroom (balanced): | 0: | Humidity: | Max. 90 % |
Dynamic Range, RS = 40 Ohm | 40: | Finish: | Anodized aluminum front, Plated and painted steel |
|
| chassis | |
(unweighted): | 0: >56 dB, 20: >88 dB, 40: >98 dB, 60: >100 dB |
|
|
Noise Figure, Pad 0, |
| LCD: | 56 x 128 dot graphic |
RS = 200 Ohm: | < 1.8 dB | Dimensions: | 19" x 1.75" x 8.2" (483 x 44 x 208 mm) |
THD+N: | 0: | Weight: | 5.5 lbs. (2.5 kg) |
Frequency Response: | 0: 20 Hz to 20 kHz, | Mains Voltage: | 100 to 240 VAC, 50 to 60 Hz |
Crosstalk: | 20/40/60: 20 Hz to 20 kHz, | Power Consumption: | <20 W |
| Backup Battery Life: | >10 years | |
(Mic., all Pad to Mic., |
|
|
|
Pad 0), worstcase: |
|
| |
(Mic., all Pad to Mic., |
|
|
|
Pad 20/40/60), worstcase: |
|
| |
Common Mode Rejection, |
|
|
|
RS = 200 Ohm: | > 60 dB @ 50/60 Hz & > 70 dB @ 1 kHz |
|
|
A to D Conversion: | 24 bit (1 bit, 128 times oversampling) |
|
|
A to D Delay: | 0.8 ms @ 48 kHz |
|
|
Analog Outputs |
|
|
|
Connectors: | XLR balanced (pin 2 hot) |
|
|
Impedance: | 50 Ohm (active transformer) |
|
|
Max. Output Level: | 22 dBu (balanced) |
|
|
Full Scale Output Range: |
|
| |
Dynamic Range: | >100 dB (unweighted) |
|
|
THD+N: |
|
| |
Frequency Response: | 10 Hz to 20 kHz: |
|
|
Crosstalk: |
|
| |
D to A Conversion: | 24 bit (1 bit, 128 times oversampling) |
|
|
D to A Delay: | 0.57 ms @ 48 kHz |
|
|
Technical Specifications are subject to change without notice !
36