![](/images/new-backgrounds/1034993/3499375x1.webp)
TROUBLE SHOOTING
You press Power switch, but there is no reaction. - The power switch on the rear panel is switched off.
You cannot turn the power off.
- Press and hold the Power switch for 3 seconds, then release to power off
No sound through the Gold Channel
-You are using Analog input, but the input selected is Digital, or some send/return has been selected on the Signal page, without anything connected.
You do not hear what you expect as Ch.2 input
- Ch.2 gets it input from Ch.1. Go to the Layout page and set the parameter: “Ch.1 to Ch.2” to OFF.
You cannot change the PAD value more than between 0 and 20
- The PAD range is limited. Go to the Utility, Config page and change the range of the PAD button.
38