CARE AND CLEANING
BEFORE CLEANING ALWAYS ALLOW THE COOLING FAN TO COOL THE APPLIANCE DOWN BEFORE SWITCHING OFF AT THE ELECTRICITY SUPPLY.
CLEANING MATERIALS
Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Abrasives must also be avoided to prevent damaging the stainless steel or painted finishes.
CLEANING THE OUTSIDE OF THE APPLIANCE
DO NOT use abrasive cleaning materials, e.g. Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur.
Regularly wipe over the control panel, oven doors and appliance sides using a soft cloth and hot soapy water. To prevent streaking on stainless steel models finish with a soft cloth. Any spillage on the stainless steel finish must be wiped off immediately.
Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish.
DO NOT ATTEMPT TO REMOVE ANY OF THE CONTROL KNOBS FROM THE PANEL AS THIS MAY CAUSE DAMAGE AND IS A SAFETY HAZARD.
Under no circumstances should the door assembly be detached from the product for cleaning. Please refer to the cleaning instructions.
CLEANING THE STAINLESS BRUSHED STEEL CONTROL KNOBS AND HANDLES (WHERE APPLICABLE)
It is strongly recommended that only hot soapy water is used for cleaning the control knobs and door handles
ANY OTHER CLEANING MATERIALS WILL DULL THE STAINLESS BRUSHED STEEL FINISH.
CLEANING INSIDE THE OVENS
The vitreous enamel oven interiors can be cleaned using normal oven cleaners or aerosol oven cleaners with care. Ensure that the manufacturers instructions are followed and that all parts are well rinsed afterwards. Aerosol cleaners must not come into contact with elements or the door seal as this may cause damage.
CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle can be washed in the dishwasher.
The grill pan, grill pan grid, meat tin, oven shelves and wirework runners may be cleaned using a soap impregnated steel wool pad. Soaking first in hot soapy water will make cleaning easier.
TO REMOVE THE WIREWORK RUNERS
The wirework runners in both ovens can be removed for cleaning.
1.Remove all shelves and furniture from the oven.
2.Hold the wirework at the bottom and gently pull towards the centre of the oven.
3.Unhook the runner at the top and remove it from the cavity.
4.To replace, hook the wirework back into the oven sides.
Ensure that the wirework runners are firmly in place before refitting the oven shelves.
30