INSTRUCTIONS FOR USE OF CLOCK AND TIMER
(ACCORDING TO THE MODELS)
“LED” PROGRAMMER (Fig. 5)
Features
24 hour clock with automatic programme and minute minder.
Functions
Cooking time, cooking end time, manual position, clock, minute minder, times to be set up to 23 hours 59 minutes.
Display
4-figures, 7-segments display for cooking times and time of day. Cooking time and manual function = saucepan symbol Automatic function = AUTO
Minutes minder = bell symbol
The symbols light up when the corresponding functions are selected.
Automatic use with cooking time and end time setting Press the cooking time button and select the length of the cooking time with + or - button. The “AUTO” and cooking time symbols light up continuously. The relay switches on. By pressing the cooking end time button the next cooking end time appears on the display. Set the cooking end time with + button. The relay and
the cooking time symbol switch off.
The symbol lights up again when the time of day corresponds to the cooking start time. When the cooking time is up, the “AUTO” symbol flashes, the sound signal rings, the cooking time symbol and the relay switch off.
Minute minder
Press the minute minder button and set the cooking time with + or - button.
The bell symbol lights up when the minute minder is operating. When the set time is up, the audible signal rings and the bell symbol
switches off.
Audible signal
A
Fig. 5
Minute minder
Cooking time
Cooking end
Manual
Subtract time
Add time
The audible signal starts at the end of a programme or of the minute minder function and it lasts for 15 minutes. To stop it, push any one of the function buttons.
Start programme and check
The programme starts 4 seconds after it has been set. The programme can be checked at any time by pressing the corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within the cooking start and end times.
Setting
To set, press and release the desired function, and within 5 seconds set the time with + and - buttons.
+ and - buttons.
The + and - buttons increase or decrease the time at a speed depending on how long the button is pressed.
Setting the time
Press any two buttons (cooking time, end time, minute minder at the same time, and + or - button to set the desired time. This deletes any previously set programme and the “AUTO” symbol flashes.
Manual use
By pressing the manual button the “AUTO” symbol switches off and the saucepan symbol lights up.
Manual operation can only be enabled after the automatic programme is over or it has been cancelled.
Automatic use
Press the cooking time or end time button to switch automatically from the manual to the automatic function.
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with + or
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the display. Set the cooking end time with + button. The AUTO and cooking time symbols light up continuously. The relay contacts switch on. When the cooking end time corresponds to the time of day, the relay and the cooking time symbol switch off. When the cooking time is up, the AUTO symbol flashes, the sound signal rings and both the relay and the cooking time button switch off.
To correct the setting error, change the cooking time or cooking end time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press the - button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
8