Automatic switch off
Should you forget to switch the oven off after a programme, or if the "ON" button is pressed accidentally, the oven will switch off automatically. In the case of manual functioning, the programmer will switch the oven off automatically if no other button is activated after a certain time. This time varies according to the temperature setting of the oven, and ranges from a minimum of 2 hours for temperatures above 230°C, up to 8 hours for those below 120°C.
At the end of automatic cooking, the oven will switch off after a period of time, this depends on the temperature selected.
The time varies between 2 hours for temperatures above 230°C, up 8 hours for those below 120°C.
Child Safety
To avoid children altering a selected programme or temperature, the Child Safety facility can be operated.
Press the "Child Safety" button and the "Oven On" button at the same time and keep them pressed for approximately 5 seconds.
The padlock symbol 
will be displayed.
It is now only possible to select any programme while simultaneously pressing the "Child safety" button.
To cancel the Child Safety Feature, press the "Oven On" button. Then press button the "Child Safety" button and the "Oven OFF" button at the same time and keep them pressed for approximately 5 seconds. The padlock symbol will disappear from the display.
Call for technical assistance 
The programmer display carries out a self check, in order to verify that it is working correctly. If a problem is identified the spanner symbol will be displayed and in the event of a breakdown a NUMBER will appear. If NUMBERS 001 or 002 appear it means that the meat probe is at fault and needs to be replaced; if a higher number appears, please contact your nearest Zanussi Service Force Centre quoting the number of Fault Code.
NOTE:
Generally after about 8 seconds from pressing a function button the programmer will allow the selected function to operate. Should another button be pressed during the operation of a function, the display will show momentarily details of the function in progress. For the new command to be accepted it will be necessary to press the other button again.
CHILD | OVEN | PROBE | COOK | STOP | MINUTE |
SAFETY OFF | ON SELECTOR | TEMP. | TIME | TIME | MINDER |
10