Zanussi ZHT 610 manual Unpacking, Wall Fitting

Page 12

Clearance Height

Aminimum clearance height of 650mm (251/2”) is required when installed above a built-in electric hob, or 700mm (271/2”) when installed above a built-in gas hob.

Aminimum clearance height of 685mm (27”) is required when installed above a slot-in electric oven, or 787mm (30 1/2”) when installed above a slot-in gas oven.

When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm, a gap of 50mm must be maintained either side of the hob.

This cooker hood must not be installed above a cooking appliance with a high level grill.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hob

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A: Built-in Electric Hob:

650mm minimum clearance

B: Built-in Gas hob:

700mm minimum clearance

C: Slot-in Electric Cooker: 685mm minimum clearance

D: Slot-in Gas Cooker: 787mm minimum clearance

Unpacking

The fittings supplied to install this cooker hood can be found with the instruction book inside the packaging and consists of the following:

Ducting spigot

Blanking plate

Wall / suspended fixing template

Wall Fitting

The cooker hood is fitted to the wall using the keyhole slots in the back of the hood.

1.Mark the position on the wall for the two

Ø 8mm dia screw holes (A) as illustrated in the drawing opposite at 568mm.

2.Check that the hole distances are correct and are level using a spirit level.

3.At this stage it is important to allow 25mm (1”) clear space above the cooker hood to enable it to be hooked onto the screws and for subsequent removal for decorating or servicing.

4.Insert the screws and tighten to a distance of 5mm.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Cooker Hood ZHT Maintenance and Cleaning For the Installer Installation InstructionsInstalling the Cooker Hood Electrical ConnectionsImportant Safety Information InstallationChild Safety Maintenance and ServiceYour Appliance Operating Instructions ControlsTo Operate Recirculation ExtractionMaintenance and Cleaning External CleaningCharcoal Filter To Remove/Replace the Charcoal FilterSynthetic Paper Grease Filter To Replace the Synthetic Paper Grease FilterChanging the Light Bulb Service and Spare Parts Symptom SolutionSomething not Working Standard Guarantee Conditions Peace of Mind for Twenty Four MonthsInstallation Instructions Electrical ConnectionsElectrical Requirements Electrical ConnectionInstalling the Cooker Hood Installation RequirementsDucting Clearance HeightUnpacking Wall FittingVenting To Fit the DuctingTo Remove the Charcoal Filter Wall Cabinet Fitting Fitting the Cooker Hood to the WallTo Level the Cooker Hood Page Page Page Page Page 4329516 04

ZHT 610 specifications

The Zanussi ZHT 610 is a high-quality kitchen hood designed to enhance the cooking experience by eliminating smoke, odors, and grease from the kitchen environment. This stylish and functional appliance is perfect for modern home chefs who value both aesthetics and performance.

One of the standout features of the Zanussi ZHT 610 is its efficient extraction system. With a powerful motor, it provides an impressive extraction rate, ensuring that the air in your kitchen remains fresh and clean even during intense cooking sessions. This hood can effectively handle the demands of various cooking styles, making it suitable for diverse culinary tasks.

The ZHT 610 boasts a sleek and compact design that allows it to seamlessly blend into any kitchen decor. Its understated elegance complements a wide range of kitchen styles, from contemporary to traditional. The hood's stainless steel finish not only adds a modern touch but is also easy to clean and maintain, ensuring lasting beauty.

In terms of functionality, the Zanussi ZHT 610 is equipped with multiple speed settings, providing users with the flexibility to adjust the extraction power according to their cooking needs. Whether simmering a delicate sauce or frying a hearty meal, this hood can adapt to various levels of airflow, ensuring optimal performance.

Another notable characteristic of the ZHT 610 is its efficient LED lighting. The built-in lights illuminate the cooking area, providing chefs with better visibility while preparing meals. This feature enhances the overall cooking experience and allows for better monitoring of dishes while they are being prepared.

The ZHT 610 also incorporates advanced filtration technology, featuring removable and washable grease filters. These filters are essential for trapping grease particles and ensuring that the air remains clean and fresh. Easy maintenance allows homeowners to keep the appliance in top condition without hassle.

Additionally, the Zanussi ZHT 610 operates quietly, allowing for an uninterrupted cooking experience. This low-noise operation is particularly appealing in open-plan kitchens or homes where tranquility is valued.

In conclusion, the Zanussi ZHT 610 is a commendable choice for anyone looking to enhance their kitchen environment. Its combination of stylish design, powerful extraction capabilities, user-friendly features, and easy maintenance makes it an ideal addition to modern kitchens, ensuring that smoke and odors are effectively managed while cooking in comfort.
Top Page Image Contents