Empire Comfort Systems CIBV-30-20 Optional Blower Installation Instructions, Fan Control

Page 26

OPTIONAL BLOWER INSTALLATION INSTRUCTIONS

Installing Optional CIB-2 Blower

1.Loosen, but do not remove, (4) hex-head screws located on the exterior, bottom of the appliance.

2.Position the blower assembly at the rear of the appliance. The blower assembly has (4) keyholes for attachment to the exterior, bottom of the appliance.

3.Place the large diameter holes in the keyholes over and behind the (4) hex-head screws that were loosened in Step 1. Push inwardontheblowerassemblytolockthekeyholesintoposition behind the screws. Tighten (4) hex-head screws to secure blower assembly to exterior, bottom of the appliance.

4.Remove wire channel from rear cover by removing (4) hex- head screws. Note: If optional blower is being installed during initial installation of appliance, the wire channel will not be attached to rear cover. (Refer to Wire Channel Installation, Page 13)

5.Attach fan control to FLAT, fan control bracket (Part 9A, Page 27) with (2) 6 x 1/4" screws provided in hardware package.

6.Attach fan control with bracket onto the wire channel by using

(2) 8 x 1/4" screws provided in hardware package.

7.Route wires from fan control and ON/OFF/REMOTE switch within wire channel.

8.When facing the rear of the appliance, align and insert fan control with bracket into 1 3/8" x 2" opening on the left side of the rear cover.

9.Attach wire channel to rear cover by using

(4) hex - head screws removed in Step 4 .

(Refer to Wire Channel Installation, Page 13)

10. Insert AUTO/OFF/ON switch into rectangular notch on valve bracket. Be sure to insert AUTO/OFF/ON switch with letters (words) upright. (See wiring diagram)

11. Attach 1/4" push-on terminal from blue wire on the fan control to the AUTO (top) tab on the switch.

12. Attach 1/4" push-on terminal from black wire to the OFF (middle) tab on the switch.

13. Attach 1/4" push-on terminal from white wire on the fan control to the ON (bottom) tab on the switch.

14. Installation of optional CIB-2 blower is completed.

Fan Control

The fan control is a non-adjustable automatic type. The fan control will require between 5 and 10 minutes of main burner operation before the fan control "closes" and activates the blower. The blower will continue to run between 5 and 10 minutes after the main burner shuts off, before the fan control "opens" and deactivates the blower.

Page 26

15627-5-0807

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Installation Instructions Table of Contents Important Safety Information This is a Heating ApplianceSafety Information for Users of LP-GAS LP-GAS Warning OdorIntroduction Specifications CIBV-30Recommended Gas Pipe Diameter Installing a New Main Gas CockGAS Supply Checking Manifold PressureInstallation on Rugs and Tile ClearancesDetailed Instructions Follow Assembly of Stove CastingAppliance Hardware Package Assembly of Stove Casting 15627-5-0807 Parts List Optional Stone Inlay InstallationInstallation of Optional Stone Inlay Wire Channel Installation LOG PlacementVent Safety Shutoff System Operating GuidelinesLiner and Insulated Liner VentingVenting Insulated Vent Enclosure FigureFor Your Safety Read Before Lighting Lighting InstructionsAir Shutter Adjustment Pilot Flame CharacteristicsMain Burner Flame Characteristics Cleaning the Log Set and FireboxWiring Cleaning Procedure MaintenanceMaintenance & Service Instructions General Glass Information Glass CleaningGlass Assembly Replacement Pilot and main burner extinguish while in operation TroubleshootingFrequent pilot outage problem Glass sootsHOW to Order Repair Parts Parts List for CIBV-30-20Parts View for CIBV-30-20 Parts List for Stove Casting Parts View for Stove Casting Refer to Wire Channel Installation, Optional Blower Installation InstructionsInstalling Optional CIB-2 Blower Fan ControlBlower Motor CleaningWiring Index Part No. No. DescriptionFAX

CIBV-30-20 specifications

Empire Comfort Systems CIBV-30-20 is a versatile and efficient heating solution designed to meet the needs of both residential and commercial spaces. This direct vent gas fireplace boasts an array of features that make it a popular choice for those looking to enhance their indoor environment with warmth and style.

One of the main features of the CIBV-30-20 is its sleek and contemporary design. The fireplace comes with a clean-faced front that allows for a seamless integration into any decor. Its compact size, with a 30-inch width, makes it suitable for various settings, from cozy living rooms to larger commercial spaces. The large viewing area maximizes the sight of the flames, providing an inviting ambiance and a warm atmosphere.

Performance is a key characteristic of the CIBV-30-20. It operates using natural gas or propane, allowing users to choose the fuel type that best fits their needs. With an impressive heat output of up to 25,000 BTUs, this fireplace efficiently heats the room, ensuring comfort during the cold months. Empire Comfort Systems has engineered the fireplace to deliver consistent and reliable performance, making it an ideal choice for year-round use.

Another significant technology integrated into the CIBV-30-20 is its direct vent system. This feature allows for safe and efficient venting, as it draws air from the outside to fuel the fire, thus eliminating the risk of indoor air pollution. The balanced flue technology ensures that combustion gases are vented outside, maintaining good air quality indoors.

In terms of controls, the CIBV-30-20 is equipped with a reliable millivolt system, which allows for easy operation without the need for electricity. For added convenience, optional remote control kits are available, enabling users to adjust flame height and heat levels from a distance.

The Empire Comfort Systems CIBV-30-20 also prioritizes efficiency. With an efficiency rating of up to 75%, it provides substantial warmth while minimizing energy consumption, making it an eco-friendly heating option.

In summary, the Empire Comfort Systems CIBV-30-20 combines modern aesthetics with advanced heating technology. Its features, including direct vent capability, high heat output, and efficient performance, make it a standout solution for anyone seeking a reliable and stylish heating appliance. Whether for home or business use, the CIBV-30-20 is designed to deliver warmth, comfort, and a welcoming ambiance.
Top Page Image Contents