Empire Comfort Systems CIBV-30-20 Cleaning, Blower Motor, Wiring, Index Part No. No. Description

Page 27

Cleaning

The blower wheel will collect lint and could require cleaning once a year. If the air output decreases or the noise level increases, it indicates a dirty wheel.

Blower Motor

The blower motor does not have oiling holes. Do not attempt to oil blower motor.

Wiring

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1, if an external electrical source is utilized. This appliance is equipped with a three-prong [grounding] plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug. For an ungrounded receptacle, an adapter, which has two prongs and a wire for grounding, can be purchased, plugged into the ungrounded receptacle and its wire connected to the receptacle mounting screws. With this wire completing the ground, the appliance cord plug can be plugged into the adapter and be electrically grounded.

CAUTION:Labelallwirespriortodisconnectionwhenservicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING:

Unplugging of blower accessory will not stop the heater from cycling. To shut heater off: Turn temperature dial or thermostat to lowest setting. Turn knob on gas control to "OFF", depressing slightly. Do not force.

PARTS LIST

Index Part

No. No. Description

1R-1454 Brass Bushing (4 Required)

2R-1499 Rubber Grommet (4 Required)

3CI-002 Blower Housing

4R-1517 Tinnerman Clip (4 Required)

5R-2804-A Blower Assembly

6CI-003 Blower Housing Cover

7

R-2099

Cord Set

8R-3767-A Wire Harness

9A

CI-004

Fan Control Bracket

 

 

(Use with CIBV-30 and CIVF-25)

9B

CI-325

Fan Control Bracket

 

 

(Use with CIDV-30)

10

R-2503

Fan Control

11R-2805 Auto/Off/On Switch

12CI-220 Fan Control Shield (Use with CIVF-25)

13R-1410 Bushing 7/8" Diameter

15627-5-0807

Page 27

Image 27
Contents Installation Instructions Table of Contents This is a Heating Appliance Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction CIBV-30 SpecificationsChecking Manifold Pressure Installing a New Main Gas CockGAS Supply Recommended Gas Pipe DiameterClearances Installation on Rugs and TileAssembly of Stove Casting Appliance Hardware PackageDetailed Instructions Follow Assembly of Stove Casting 15627-5-0807 Optional Stone Inlay Installation Installation of Optional Stone InlayParts List LOG Placement Wire Channel InstallationOperating Guidelines Vent Safety Shutoff SystemInsulated Vent Enclosure Figure VentingVenting Liner and Insulated LinerLighting Instructions For Your Safety Read Before LightingCleaning the Log Set and Firebox Pilot Flame CharacteristicsMain Burner Flame Characteristics Air Shutter AdjustmentWiring Maintenance Maintenance & Service InstructionsCleaning Procedure Glass Cleaning Glass Assembly ReplacementGeneral Glass Information Glass soots TroubleshootingFrequent pilot outage problem Pilot and main burner extinguish while in operationParts List for CIBV-30-20 HOW to Order Repair PartsParts View for CIBV-30-20 Parts List for Stove Casting Parts View for Stove Casting Fan Control Optional Blower Installation InstructionsInstalling Optional CIB-2 Blower Refer to Wire Channel Installation,Index Part No. No. Description CleaningWiring Blower MotorFAX

CIBV-30-20 specifications

Empire Comfort Systems CIBV-30-20 is a versatile and efficient heating solution designed to meet the needs of both residential and commercial spaces. This direct vent gas fireplace boasts an array of features that make it a popular choice for those looking to enhance their indoor environment with warmth and style.

One of the main features of the CIBV-30-20 is its sleek and contemporary design. The fireplace comes with a clean-faced front that allows for a seamless integration into any decor. Its compact size, with a 30-inch width, makes it suitable for various settings, from cozy living rooms to larger commercial spaces. The large viewing area maximizes the sight of the flames, providing an inviting ambiance and a warm atmosphere.

Performance is a key characteristic of the CIBV-30-20. It operates using natural gas or propane, allowing users to choose the fuel type that best fits their needs. With an impressive heat output of up to 25,000 BTUs, this fireplace efficiently heats the room, ensuring comfort during the cold months. Empire Comfort Systems has engineered the fireplace to deliver consistent and reliable performance, making it an ideal choice for year-round use.

Another significant technology integrated into the CIBV-30-20 is its direct vent system. This feature allows for safe and efficient venting, as it draws air from the outside to fuel the fire, thus eliminating the risk of indoor air pollution. The balanced flue technology ensures that combustion gases are vented outside, maintaining good air quality indoors.

In terms of controls, the CIBV-30-20 is equipped with a reliable millivolt system, which allows for easy operation without the need for electricity. For added convenience, optional remote control kits are available, enabling users to adjust flame height and heat levels from a distance.

The Empire Comfort Systems CIBV-30-20 also prioritizes efficiency. With an efficiency rating of up to 75%, it provides substantial warmth while minimizing energy consumption, making it an eco-friendly heating option.

In summary, the Empire Comfort Systems CIBV-30-20 combines modern aesthetics with advanced heating technology. Its features, including direct vent capability, high heat output, and efficient performance, make it a standout solution for anyone seeking a reliable and stylish heating appliance. Whether for home or business use, the CIBV-30-20 is designed to deliver warmth, comfort, and a welcoming ambiance.