Empire Comfort Systems CIBV-30-20 Appliance Hardware Package, Assembly of Stove Casting

Page 9

APPLIANCE HARDWARE PACKAGE

Appliance Hardware Package Parts List

Part

Part

Quantity

Description

Number

Supplied

1/42-0 x 1" Phillips Head Bolt

R-3188

4

1/4-20 x 3/8" Phillips Head Bolt

R-3646

16

1/4-20 x 1/2" Leveling Bolt

R-3747

4

No. 10 x 1/2" Hex Washer Head Screw

R-2737

10

1/4-20 Washer Head Nut

R-3185

4

Leg Pad "A" (see Figure 6)

CI-008

2

Leg Pad "B" (see Figure 6)

CI-009

2

1-1/4" x 1/2" Retaining Tab (see Figure 8)

CI-007

4

1/4" x 9/32 Washer (Not Shown)

R-1150

8

Figure 5

ASSEMBLY OF STOVE CASTING

Assembly of Stove Casting (Figures 6, 7, 8, 9, 10, 11 and 12) Attention: Included in the hardware package are (8) 1/4" inside diameter washers. A 1/4" washer may be used with a 1/4-20 x 3/8" bolt when assembling the stove casting parts. If a bolt hole is not tapped deep enough for a tight fit between stove casting parts, the 1/4" washer can be used as a shim to provide a tight fit.

The 1/4" washers are not required for assembly of the stove casting if all the bolt holes are tapped to a proper depth.

Additonal 1/4" washers are to be purchased locally.

1.Place porcelain casting pieces on a non-abrasive surface in order to protect the porcelain finish. The exterior of the porcelain casting pieces should be facing the non-abrasive surface.

2.The assembly of the casting is accomplished in 7 stages:

A.Attaching legs to the sides (Figure 6).

B.Attaching rear cover to sides (Figure 7).

C.Removing protective packaging from casting front and window (Figure 8).

D.Assembly of front by attaching retaining tabs and placing front on unit (Figure 9).

E.Inserting firebox into partially completed assembly (Figure 10 and Figure 11).

F.Attaching firebox to rear cover (Figure 12).

G.Placing top on unit.

Detailed Instructions Follow

3.Refer to Figure 6, the leg pads will have the letter "A" and "B" stamped into the metal. Place leg pad "A" and leg pad "B" at the bottom of each casting side. Leg pad "A" attaches to the front of the casting side, right and to the rear of the casting side, left. Leg pad "B" attaches to the rear of the casting side, right and to the front of the casting side, left. Position the 3/4" flange on the leg pad against the (2) locator dimples on the casting side. The 3/4" flange must be facing upward, toward the top louver openings on the casting side. Attach the two rear leg pads to the casting sides with (2) 3/8" bolts. Attach but do not completely tighten the two front leg pads to the casting sides with (2) 3/8" bolts. Attention: The front leg pads can be adjusted to provide a snug fit between the casting front and the casting sides.

4.Attach (4) leveling bolts to the bottom of the (4) legs.

15627-5-0807

Page 9

Image 9
Contents Installation Instructions Table of Contents This is a Heating Appliance Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction CIBV-30 SpecificationsGAS Supply Installing a New Main Gas CockRecommended Gas Pipe Diameter Checking Manifold PressureClearances Installation on Rugs and TileAssembly of Stove Casting Appliance Hardware PackageDetailed Instructions Follow Assembly of Stove Casting 15627-5-0807 Optional Stone Inlay Installation Installation of Optional Stone InlayParts List LOG Placement Wire Channel InstallationOperating Guidelines Vent Safety Shutoff SystemVenting VentingLiner and Insulated Liner Insulated Vent Enclosure FigureLighting Instructions For Your Safety Read Before LightingMain Burner Flame Characteristics Pilot Flame CharacteristicsAir Shutter Adjustment Cleaning the Log Set and FireboxWiring Maintenance Maintenance & Service InstructionsCleaning Procedure Glass Cleaning Glass Assembly ReplacementGeneral Glass Information Frequent pilot outage problem TroubleshootingPilot and main burner extinguish while in operation Glass sootsParts List for CIBV-30-20 HOW to Order Repair PartsParts View for CIBV-30-20 Parts List for Stove Casting Parts View for Stove Casting Installing Optional CIB-2 Blower Optional Blower Installation InstructionsRefer to Wire Channel Installation, Fan ControlWiring CleaningBlower Motor Index Part No. No. DescriptionFAX

CIBV-30-20 specifications

Empire Comfort Systems CIBV-30-20 is a versatile and efficient heating solution designed to meet the needs of both residential and commercial spaces. This direct vent gas fireplace boasts an array of features that make it a popular choice for those looking to enhance their indoor environment with warmth and style.

One of the main features of the CIBV-30-20 is its sleek and contemporary design. The fireplace comes with a clean-faced front that allows for a seamless integration into any decor. Its compact size, with a 30-inch width, makes it suitable for various settings, from cozy living rooms to larger commercial spaces. The large viewing area maximizes the sight of the flames, providing an inviting ambiance and a warm atmosphere.

Performance is a key characteristic of the CIBV-30-20. It operates using natural gas or propane, allowing users to choose the fuel type that best fits their needs. With an impressive heat output of up to 25,000 BTUs, this fireplace efficiently heats the room, ensuring comfort during the cold months. Empire Comfort Systems has engineered the fireplace to deliver consistent and reliable performance, making it an ideal choice for year-round use.

Another significant technology integrated into the CIBV-30-20 is its direct vent system. This feature allows for safe and efficient venting, as it draws air from the outside to fuel the fire, thus eliminating the risk of indoor air pollution. The balanced flue technology ensures that combustion gases are vented outside, maintaining good air quality indoors.

In terms of controls, the CIBV-30-20 is equipped with a reliable millivolt system, which allows for easy operation without the need for electricity. For added convenience, optional remote control kits are available, enabling users to adjust flame height and heat levels from a distance.

The Empire Comfort Systems CIBV-30-20 also prioritizes efficiency. With an efficiency rating of up to 75%, it provides substantial warmth while minimizing energy consumption, making it an eco-friendly heating option.

In summary, the Empire Comfort Systems CIBV-30-20 combines modern aesthetics with advanced heating technology. Its features, including direct vent capability, high heat output, and efficient performance, make it a standout solution for anyone seeking a reliable and stylish heating appliance. Whether for home or business use, the CIBV-30-20 is designed to deliver warmth, comfort, and a welcoming ambiance.