Zanussi zdf231 Filling with dishwasher salt, Use only special salt suitable for dishwashers

Page 10

Press and hold the start/cancel button and turn the programme selector dial clockwise till the first pro- gramme.

Keep the button pressed until the programme selector indicator light and the start/cancel indicator light start flashing.

Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set.

The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds.

To change the level, press the start/cancel button. Each time the button is pressed the level increases. (Level 1 follows level 10).

The end of programme indicator light indicates the new setting.

To memorise the operation, turn the programme se- lector dial to position off.

Filling with dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Unscrew the cap.

Only before filling with

 

salt for the first time, fill

 

the salt container with

 

water.

Using the funnel provi- ded, pour in the salt until the container is filled with salt.

10

Image 10
Contents Dishwasher ZDF Contents Child safety Safety informationGeneral safety Correct useInstallation Control panelStarting the washing programme Delay start button Programme selector indicator light Indicator lightsWashing programmes First useWhen using tablets that integrate rinse aid and detergent Set the water softenerWater hardness Clarke Mmol/l Setting the water softener manually see tableSetting the water softener electronically see table Use of saltFilling with dishwasher salt Use only special salt suitable for dishwashersFilling with rinse aid Adjusting the dosage of rinse aid Loading cutlery and dishesAre of limited suitability Maximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket Use of detergent To move to the higher position proceed as fol- lowsCleaning the filters Care and cleaningUnloading the dishwasher Internal cleaning Cleaning the spray armsExternal cleaning Prolonged periods of non- operationMoving the machine Frost precautionsEnvironmental concerns Packaging materialPossible cause and solution Fault code and malfunctionSomething not working Wash results are not satisfactory Technical data Consumption valuesFull load 12 standard place settings InstallationHints for test institutes Water connection Inlet hoseDrain hose Electrical connectionFitting under a counter Guarantee conditionsGuarantee/Customer Service LevellingEuropean Guarantee ExclusionsPage Page Page Page Page 156996240-00-15032007 Subject to change without notice