Zanussi zdf231 user manual Starting the washing programme

Page 5

1.Programme selector dial and On/Off switch

2.Start/cancel button

3.Delay start button

4.Indicator lights

5.Programme selector indicator light

Programme selector dial and On/Off switch

Start/cancel button

•when in this position, the machine is switched off (corresponding light off),

•when the marker on the dial corresponds with a programme, the machine is switched on and a pro- gramme is selected (programme selector indicator light on)

•Starting the washing programme:

1.Select a washing programme.

2.Press the Start/Cancel button (corresponding light on).

IMPORTANT!

Once the programme has started, if you want to change the selection made you must cancel the washing programme in progress.

•Cancel the washing programme in progress:

1.Press and hold the Start/Cancel button until the corresponding light turns off.

2.Release the Start/Cancel button.

3.Turn the programme selector dial to the Off position or select a new washing programme (check that there is detergent in the detergent dispenser.

5

Image 5

Contents Dishwasher ZDF Contents General safety Safety informationChild safety Correct useControl panel InstallationStarting the washing programme Indicator lights Delay start button Programme selector indicator lightFirst use Washing programmesSet the water softener When using tablets that integrate rinse aid and detergentSetting the water softener electronically see table Setting the water softener manually see tableWater hardness Clarke Mmol/l Use of saltUse only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket To move to the higher position proceed as fol- lows Use of detergentUnloading the dishwasher Care and cleaningCleaning the filters External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironmental concerns Frost precautionsMoving the machine Packaging materialSomething not working Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Consumption values Technical dataHints for test institutes InstallationFull load 12 standard place settings Inlet hose Water connectionElectrical connection Drain hoseGuarantee/Customer Service Guarantee conditionsFitting under a counter LevellingExclusions European GuaranteePage Page Page Page Page 156996240-00-15032007 Subject to change without notice