Zanussi zdf231 user manual Cleaning the spray arms, External cleaning, Internal cleaning

Page 17

Clean filters A, B and C

Turn the handle about 1/4

Remove filter A from the

thoroughly under running

turn anticlockwise and

base of the washing

water.

remove filters B and C.

compartment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Put the flat filter A back in

Replace the filters and

the base of the washing

lock by turning the handle

compartment and ensure

clockwise to the stop.

that it fits perfectly under

 

the two guidesD.

 

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If neces- sary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.

Prolonged periods of non- operation

If you are not using the machine for any pro- longed period of time you are advised to:

1.Unplug the appliance and then turn off the water.

17

Image 17
Contents Dishwasher ZDF Contents General safety Safety informationChild safety Correct useControl panel InstallationStarting the washing programme Indicator lights Delay start button Programme selector indicator lightFirst use Washing programmesSet the water softener When using tablets that integrate rinse aid and detergentSetting the water softener electronically see table Setting the water softener manually see tableWater hardness Clarke Mmol/l Use of saltUse only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket To move to the higher position proceed as fol- lows Use of detergentUnloading the dishwasher Care and cleaningCleaning the filters External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironmental concerns Frost precautionsMoving the machine Packaging materialSomething not working Fault code and malfunctionPossible cause and solution Wash results are not satisfactory Consumption values Technical dataHints for test institutes InstallationFull load 12 standard place settings Inlet hose Water connectionElectrical connection Drain hoseGuarantee/Customer Service Guarantee conditionsFitting under a counter LevellingExclusions European GuaranteePage Page Page Page Page 156996240-00-15032007 Subject to change without notice