Zanussi ZCE 651, ZCE 650 manual How to use the pyrolytic clean- ing function

Page 23

How to use the pyrolytic clean- ing function

Before activating the pyrolytic cleaning function, remove any excessive spillage and make sure that the oven is empty. Do not leave anything inside it (e.g. pans, grids, baking tray, drippin pan) as this could severely damage them.

Ensure that the oven door is closed before activating the pyrolytic cleaning function.

When the pyrolytic cleaning function is on, it is advisable not to use the hob as this could cause overheating and damage the appliance.

During the pyrolytic cleaning cycle the oven door becomes hot. Children should be KEPT AWAY until it has cooled.

Choose this function to clean the oven by pyrolysis. The following pyro levels are available:

Pyrolytic 1 (PYr I) time : 2 h = 30 min heat-up +1 h at 480°C + 30 min cooling down.

Pyrolytic 2 (PYr 2) time : 2 h 30 min. = 30 min heat-up +1 h 30 min at 480°C + 30 min cooling down.

The pyrolytic cleaning cycle duration/time cannot be changed.

1.Turn the oven knob to position . The “Cook Time” indicator and the PYr I indication will flash in the dis- play (Fig. 22).

2.Press “Pyrolytic” button to activate the pyrolytic cleaning function. The temperature indicators will start lighting alternatively. This means that the oven is rapidly heating up.

The “PYr I” indication will stop to flash, the oven light will go out and the pyrolytic cleaning cycle will start (Fig. 24).

If the oven cavity is very dirty, we advise you to select the pyrolytic 2 function (PYr 2) on the programmer display.

1.Press “Pyrolytic” button to select the pyrolytic 2 (PYr 2) function.

Press button “Time” to display the remaining time.

After some time, the temperature level indicators will light permanently in the display. This means that the oven door has been locked.

At the end of the pyrolitic cleaning process, “0.00” will flash in the display.

Once the oven has cooled down (check the temperature level indicators coming off one by one), the oven door will unlock.

To reset the oven, turn the oven function control knob to the “OFF” position (0).

If you press a button other than the knob, the alarm will switch off and the display will show “--- °C”. This means that the oven cannot be operated.

To reset the oven, turn the oven function control knob to the “OFF” position (0).

To stop the pyrolytic cleaning cycle at any time, turn the oven function control knob to the “OFF” position (0).

NOTE: The time indication is comprehensive of the cooling down time.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Electric Cookers Important Safety Information Contents Storage Drawer Oven Cavity AccessoriesControl Panel Operation Saucepans and frying pans Using the ceramic glass hobCeramic glass surface Energy consumptionConventional cooking The heat comes Time/Temperature Control knobElectric Oven Oven Function Control KnobOven will work only if the time of day has been set How to set the time of dayTo reset the correct time of day Electronic programmerSpecial functions Temperature level indicatorsHeating up for the first time Using the ceramic hob for the first timeBefore the First Use of the Cooker To set the minute minder To cancel the minute minderProgramming the Oven Minute minder functionTo change the duration time How to make the oven switch off automaticallyTo cancel the duration time To set the duration timeHow to make the oven switch on and off automatically How to switch off the display Safety and Energy saving functionsSafety Cut-Off Function Child Safety FunctionEffects of dishes on cooking results Using the OvenCondensation and steam CookwareHints and Tips Using the Conventional OvenHow to Use Conventional Oven Top oven element onlyTemperature Cooking time Position Minutes Cooking Chart Conventional OvenPizza Oven Pizza OvenGrilling How to Use the Full GrillHow to Use the Inner Grill GrillingDefrosting How to Use DefrostingDefrosting Chart Stain removal Cleaning the Ceramic HobCleaning after each use Special problemsPyrolytic cleaning Cleaning the OvenCleaning materials External cleaningHow to use the pyrolytic clean- ing function Page Extract the inner glass support Cleaning The Oven DoorDisconnect the appliance from the electricity supply Oven lamp replacementSomething not working Symptom SolutionCustomer Care Department Service and Spare PartsCustomer Care Department This guarantee does not cover Guarantee ConditionsZanussi-Electrolux Guarantee conditions Exclusions European GuaranteeImportant Safety Requirements Instructions for the InstallerMin. size Cable/flex Supply Cable SpecificationsElectrical connections Customer Care
Top Page Image Contents