Zanussi ZCE 620 X manual Something not working, Symptom Solution

Page 23

Something not working

If the appliance is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM

SOLUTION

■ The cooker does not operate.

◆ Check that the unit is plugged in and the electrical

 

supply is switched on

 

◆ Check that the RCCB has not tripped (if fitted)

 

◆ Check the mains fuse has not blown

 

◆ Check the correct control knob has been turned.

 

 

■ The ceramic hob is not giving satisfactory results

◆ Check the cooking pan is the correct size for the

 

cooking zone.

 

◆ Check the cooking pan has a flat base.

 

◆ Check the setting is correct for the type of

 

cooking.

 

 

■ The oven does not come on

◆ Check the oven is in manual operation and that

 

both a cooking function and temperature have been

 

selected.

 

◆ The socket switch or the switch from the mains

 

supply to the oven are ON.

 

 

■ The thermostat pilot light does not come on

◆ Select a temperature with the thermostat control

 

knob

 

◆ Select a function with the oven function control

 

knob.

 

 

■ The oven light does not come on

◆ Select a function with the oven function control

 

knob

 

◆ Check the light bulb, and replace it if necessary

 

(see "Replacing the Oven Light")

 

 

■ It takes too long to finish the dishes, or they are

◆ The temperature may need adjusting

cooked too fast.

 

 

 

■ Steam and condensation settle on the food and the

◆ Refer to the contents of this booklet, especially to

oven cavity.

the chapter “Using the Oven”.

 

◆ Leave dishes inside the oven no longer than 15-20

 

minutes after the cooking is completed. See page 10

 

 

■ The timer does not work

◆ Check the instructions for the timer.

 

 

■ The oven fan is noisy

◆ Check that shelves and bakeware are not vibrating

 

in contact with the oven back panel.

 

 

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Electric Cooker ZCE 620 During Use Important Safety InformationChild Safety ServiceContents Description of the Cooker Control Panel Normal cooking zones Residual heat indicatorsOperation Ceramic hob cooking zonesSaucepans and frying pans Energy consumptionThermostat Control Knob Auto SymbolOven Function Control Knob To SET the Minute Minder Hour Clock and TimerTo SET the Time of DAY Manual Function To SET the Timer to Switch OFF onlyTo SET the Timer to Switch the Oven on and OFF To Cancel a ProgrammeHeating up for the first time Using the OvenUsing the ceramic hob for the first time Before the First Use of the CookerStorage Drawer From the oven when opening the oven door toCondensation and steam CookwareThings to Note Using the Conventional OvenHow to Use Conventional Oven Food Thermostat Runner Time Cooking ChartEven Heating for Baking Using the Fan OvenLower Temperatures Meat Thermostat Cooking Roasting ChartHints andTips Defrosting How to Use DefrostingGrilling How to Use the GrillStain removal Cleaning the Ceramic HobCleaning after each use Special problemsExternal cleaning Cleaning the OvenCleaning materials Oven Shelves Oven lamp replacementOven Cavity Something not working Symptom SolutionZanussi Service and Spare PartsCustomer Care Customer Care DepartmentPeace of Mind for 12 Months Zanussi Guarantee ConditionsExclusions This guarantee does not cover European GuaranteeCeramic Hob Instructions for the InstallerImportant Safety Requirements LocationThis Cooker Must be Earthed Supply Cable SpecificationsElectrical connections
Top Page Image Contents