Installing the hood 9
fig. |
figfig.. |
fig.
L (live) = Black N (neutral) = White
(ground) = Green
L
N
•Mount the junction box onto the range hood using 2 short screws (15) (fig. 
).
Electrical connections
DANGER
Danger of electric shock! All fittings must be installed by a competent person in accordance with current wiring regulations and local building regulations. If in doubt, consult a qualified electrician.
IMPORTANT
Always switch off the electricity supply at the mains during installation, cleaning and maintenance. We recommend that the fuse is withdrawn or circuit breaker switched off at the distribution board while work is in progress.
Step 5:
•Loosen the 2 short screws from the junction box (fig. 
).
fig. |
•Connect the incoming positive, neutral and ground cables to the respective terminals. The ground cable is already 
).
fig. |
Step 6:
•Insert the upper chimney (3) into the lower chimney
(3) from top to bottom (fig. 
).
•Mount upper and lower chimney (3) on the range hood (1). Fit the tab, which is bend by 90 degrees, into the lower bracket notch and mount to the lower bracket (5) (fig. 
/
).
•Pull the upper chimney (3) to the upward position to match the screw hole of the upper bracket. Mount to the upper bracket (4) with 2 side screws (12) (fig. 
).
fig. | fig. |
fig. | fig. |
| GB |