Extron electronic DVI-RGB 200 manual Installation Overview, Mounting the Interface

Installation and

Operation

This sections details the installation and operation of the DVI-RGB 200, including:

•Installation Overview

•Mounting the Interface

•Rear Panel Connections and Control

•Front Panel Controls and Indicator

•Operation

Installation Overview

Follow these steps to install and set up an Extron DVI-RGB 200 for operation:

1	Turn off all of the equipment. Ensure that the video sources and the output display are
	all turned off and disconnected from the power source.
2	Mount the interface. See Mounting the Interface.
3	Connect the cables. See Rear Panel Connections and Controls.
4	Plug in the power supply, then turn on the display devices and the input devices.
5	Set the level and peaking. See Front Panel Controls and Indicator.

Mounting the Interface

CAUTION: Installation and service must be performed by authorized personnel only.

Detailed mounting instructions can be found in the Reference Information section. The 1U high, half-rack width interface DVI-RGB 200 can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk or tabletop. Use the applicable optional hardware:

•RSU 126 6-inch deep universal rack shelf kit (part #60-190-10)

•RSB 126 6-inch deep basic rack shelf (part #60-604-11)

•RSU 129 9.5-inch deep universal rack shelf kit (part #60-190-01)

•RSB 129 9.5-inch deep basic rack shelf (part #60-604-02)

•MBU 125 Under-desk mount kit (part #70-077-01)

•MBD 129 Through-desk mount kit (part #70-077-02)

DVI-RGB 200 • Installation and Operation 2