Mounting the Interface

CAUTION: Installation and service must be performed by authorized personnel only.

The 1U high, half rack width DVI-RGB 200 can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk or tabletop.

Tabletop Use

Affix the four included rubber feet to the bottom of the unit and place it in any convenient location.

Rack Shelf Mounting

For rack mounting, mount the interface using any of the following rack mounting options:

•RSU 126 6-inch deep universal rack shelf kit (part #60-190-10). See figure 5.

•RSB 126 6-inch deep basic rack shelf (part #60-604-11)

•RSU 129 9.5-inch deep universal rack shelf kit (part #60-190-01). See figure 6.

•RSB 129 9.5-inch deep basic rack shelf (part #60-604-02)

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines pertain to the installation of a

DVI-RGB 200 unit into a rack.

1.Elevated operating ambient — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the maximum ambient temperature specified by the manufacturer [Tma = +32 to +122 °F (0 to +50 °C)].

2.Reduced air flow — Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

3.Mechanical loading — Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (such as the use of power strips).

DVI-RGB 200 • Reference Information

10

Page 14 Page 16
Page 15
Image 15
Extron electronic DVI-RGB 200 manual Tabletop Use, Rack Shelf Mounting, UL Guidelines for Rack Mounting
Page 14 Page 16

DVI-RGB 200 specifications

The Extron DVI-RGB 200 is a versatile and advanced video distribution amplifier designed to meet the demanding needs of professional audio-visual installations. This device provides robust signal management and exceptional image quality for DVI and RGB video signals, making it an essential tool for AV professionals.

One of the standout features of the DVI-RGB 200 is its ability to handle a variety of video formats. The device supports DVI, RGB, and component video signals, facilitating seamless integration with numerous source devices such as computers, Blu-ray players, and other multimedia equipment. This flexibility ensures that users can rely on the DVI-RGB 200 for a wide range of applications, from classroom settings to corporate environments.

The Extron DVI-RGB 200 incorporates advanced technologies that enhance video performance. With its high bandwidth capability, the device can transmit video signals with resolutions up to 1920x1200 at 60 Hz. This ensures that the image quality remains crisp and detailed, even when extended over long distances. The DVI-RGB 200 utilizes digital signal processing to guarantee accurate signal reproduction and minimize artifacts, an essential consideration in high-stakes AV presentations.

Furthermore, the DVI-RGB 200 features multiple outputs, enabling users to connect multiple displays without signal degradation. With support for up to eight outputs, the device is ideal for distributing video signals to several locations simultaneously, a valuable asset in environments where multiple screens are required for presentations or information display.

Another important characteristic of the Extron DVI-RGB 200 is its user-friendly design. The device includes easy-to-read LED indicators that provide real-time information about signal status and operational conditions. Installation and setup are straightforward, thanks to the compact form factor and intuitive layout of ports and controls.

The DVI-RGB 200 also incorporates Extron's patented Electronically Balanced output design, which ensures that the device can operate over long cable runs without introducing noise or signal dropouts. Additionally, the built-in input equalization enhances signal integrity, providing a reliable solution for long-distance video transmission.

In summary, the Extron DVI-RGB 200 combines advanced signal management capabilities with a user-friendly design. Its compatibility with various video formats, exceptional image quality, and robust features make it a go-to choice for AV professionals seeking a reliable distribution amplifier for their installations. Whether in a conference room, classroom, or any other multimedia environment, the DVI-RGB 200 stands out as a dependable and high-performing solution for video signal distribution.
Top Page Image Contents