DVI Connector Pin Assignments

F DIP switches —

SOG (Sync on Green) On/Off switch — Set this switch to the On (up) position to enable SOG for RGsB video. Set this switch to the Off (down) position to disable SOG for RGBS or RGBHV video.

Refresh switch — If the EDID Source switch (D) is in the Selector position and the EDID select switch (E) is in position 1 through F position, set this switch either up or down to select the refresh rate of the selected output (see table 1).

If the EDID Source switch (D) is in the Selector position and the EDID select switch is in position 0, set this switch up to capture the EDID data from the monitor connected to the Buffered Loop-through connector (B) (see Capturing a User-recorded EDID).

G AC power connector — Plug a standard IEC power cord into this connector to connect the interface to a 100 to 240 VAC, 50 Hz or 60 Hz power source.

Figure 3 defines the DVI pin assignments.

1	8	C1	C2
9			C4C5
17	24	C3	C4C5

Female Connector

Male Connector

Pin	Signal	Pin	Signal	Pin	Signal
1	TMDS data 2–	9	TMDS data 1–	17	TMDS data 0–

2	TMDS data 2+	10	TMDS data 1+	18	TMDS data 0+
3	TMDS data 2 shield	11	TMDS data 1shield	19	TMDS data 0 shield

4	Spare	12	Spare	20	Spare
5	Spare	13	Spare	21	Spare
6	DDC clock	14	+5 V power	22

7	DDC data	15	Ground (+5 V)	23	TMDS clock+
8	No connection	16	Hot Plug Detect	24	TMDS clock–

C1	Analog Red Video	C3	Analog Blue Video	C5	Analog Ground

C2	Analog Green Video	C4	Analog H. Sync

Figure 3. DVI Connectors

DVI signals run at a very high frequency and are especially prone to bad video connections, too many adapters, or excessive cable length. To avoid the loss of an image or jitter, follow these guidelines:

•Do not exceed 16.4 feet (5 meters) on the input or buffered loop-through of the interface.

•Limit or avoid the use of adapters.

•Use only approved DVI connectors.

NOTES: • Use only cables specifically intended for DVI interfaces. Use of non-DVI cables

or modified cables can cause the DVI-RGB 200 to not operate correctly.

• The missing connectors on the included DVI cable (TMDS data 3, 4, and 5) are not required for the single link of DVI-D data supported by the DVI-RGB 200.

These pins are grayed out in figure 3.

DVI-RGB 200 • Installation and Operation

DVI-RGB 200 specifications

The Extron DVI-RGB 200 is a versatile and advanced video distribution amplifier designed to meet the demanding needs of professional audio-visual installations. This device provides robust signal management and exceptional image quality for DVI and RGB video signals, making it an essential tool for AV professionals.

One of the standout features of the DVI-RGB 200 is its ability to handle a variety of video formats. The device supports DVI, RGB, and component video signals, facilitating seamless integration with numerous source devices such as computers, Blu-ray players, and other multimedia equipment. This flexibility ensures that users can rely on the DVI-RGB 200 for a wide range of applications, from classroom settings to corporate environments.

The Extron DVI-RGB 200 incorporates advanced technologies that enhance video performance. With its high bandwidth capability, the device can transmit video signals with resolutions up to 1920x1200 at 60 Hz. This ensures that the image quality remains crisp and detailed, even when extended over long distances. The DVI-RGB 200 utilizes digital signal processing to guarantee accurate signal reproduction and minimize artifacts, an essential consideration in high-stakes AV presentations.

Furthermore, the DVI-RGB 200 features multiple outputs, enabling users to connect multiple displays without signal degradation. With support for up to eight outputs, the device is ideal for distributing video signals to several locations simultaneously, a valuable asset in environments where multiple screens are required for presentations or information display.

Another important characteristic of the Extron DVI-RGB 200 is its user-friendly design. The device includes easy-to-read LED indicators that provide real-time information about signal status and operational conditions. Installation and setup are straightforward, thanks to the compact form factor and intuitive layout of ports and controls.

The DVI-RGB 200 also incorporates Extron's patented Electronically Balanced output design, which ensures that the device can operate over long cable runs without introducing noise or signal dropouts. Additionally, the built-in input equalization enhances signal integrity, providing a reliable solution for long-distance video transmission.

In summary, the Extron DVI-RGB 200 combines advanced signal management capabilities with a user-friendly design. Its compatibility with various video formats, exceptional image quality, and robust features make it a go-to choice for AV professionals seeking a reliable distribution amplifier for their installations. Whether in a conference room, classroom, or any other multimedia environment, the DVI-RGB 200 stands out as a dependable and high-performing solution for video signal distribution.

Extron electronic DVI-RGB 200 manual DVI Connector Pin Assignments, DIP switches

Models: DVI-RGB 200

F DIP switches —