PREPARE THE LOCATION
Style 3 - Cut Openings for 3¼” x 10” (8.3 x 25.4 cm) Rectangular Vent Transition to Round Vent
Roof Venting
To make a circular vent opening on the underside of the cabinet top:
1.Mark a centerline on the underside of the top of cabinet. .Mark a line 5” (12.7 cm) from the back wall on the
underside of the top of cabinet.
.Use a compass or a circle template to draw a circle with a diameter of 7½” (19 cm).
Use saber or keyhole saw to cut the circular vent
opening.Centerline Ø 7½”
(19 cm) 
*5”
(12.7 cm)
Cabinet cutouts
*From wall, not cabinet frame
Style 4 - Cut Openings for 7” (17.8 cm) Round Vent to Round Vent Transition
Roof Venting
To make a circular vent opening on the underside of the cabinet top:
1.Mark a centerline on the underside of the top of cabinet. .Mark a line 5” (12.7 cm) from the back wall on the
underside of the top of cabinet.
.Use a compass or a circle template to draw a circle with a diameter of 7½” (19 cm).
Use saber or keyhole saw to cut the circular vent opening.
4.Repeat steps
cabinet. | Centerline |
*Ø 7½” | |
(19 cm) |
|
| * |
*5” |
|
(12.7 cm) | Cabinet |
| |
* | cutouts |
| |
*From wall, not |
|
cabinet frame |
|
Install Vent System
1.Install vent through the vent opening in upper cabinet or wall. Complete venting system according to the selected venting method. See “Venting Requirements” section.
.Use caulking to seal exterior wall or roof opening around the cap.
INSTALL RANGE HOOD (Ducted version)
NOTE
Your model includes a 3¼” x 10” (8.3 x 25.4 cm) rectangular transition and a 7” (17.8 cm) round vent mounting plate inside the package.
1.Detach the 3¼” x 10” (8.3 x 25.4 cm) rectangular and 7” (17.8 cm) round vent from the package.
Unpack the one you have chosen and set the other in a safe place.
A
B
A. 3¼” x 10” (8.3 x 25.4 cm) rectangular vent damper
B. 7” (17.8 cm) round vent mounting plate
10