Frigidaire 318201452, 30 installation instructions Countertop Cutout Opening

Page 2

GAS COOKTOP INSTALLATION INSTRUCTIONS

			30" Min. Clearance
			Between the Top
		A Min.	of the Cooking
13" Max. Depth		A Min.	Platform and
For Cabinet			Unprotected Wood
For Cabinet			or Metal
Installed Above			or Metal
Installed Above			Cabinet
Cooktop.			Cabinet
Cooktop.
		Dimensions J is the Minimum	Clearance
		Distance Required Between
		Rear of Top Panel to Adjacent
	18" Min.	Combustible Surfaces.
	18" Min.

Dimension K is the

Dimension H is the

Minimum Clearance

Minimum Clearance

Required From Left

24"

Required From Right

Side of Top Panel to

Side of Top Panel to

Adjacent Combustible

Adjacent Combustible

Surface.

Surface.

Allow Dimension L Space Below

Cooktop for Piping and Electrical

Connections.

Note: (For 26" and 36" Models Only). The rear edge of opening

To eliminate the risk of

must be 1 ½" from rear face of base cabinet. If countertops are

ordered from a supplier other than cabinet supplier, the relation of

burns or fire by reaching over heated

the cutout in relation to the rear of the cabinet shall be specified.

surfaces, cabinet storage space located

above the cooktop should be avoided. If

Model

H

J

K

L

cabinet storage is provided, risk can be

26" Models

1"

½"

1"

8½"

reduced by installing a range hood that

projects horizontally a minimum of 5"

30" Models

0"

2"

2"

8 1/8"

beyond the bottom of the cabinets.

36" Models

1"

2½"

1"

8¼"

Figure 2 – COUNTERTOP CUTOUT OPENING

2

Image 2

Contents Cutout Dimensions Model Min MaxCountertop Cutout Opening Important Note to the Consumer Important Notes to the InstallerSafety Tips Gas Surface Units Ventilating HoodsSecure the Unit Safety on the CooktopWall Outlet Location some models Important Please Read Before ContinuingRelease the Burners Provide an Adequate Gas SupplyCooktops Unit Clam Down InformationConnection to gas 36 Cooktops see figureBurner Valves Conversion LP/Propane Gas ConversionPressure Regulator Conversion Burner Air Shutter Adjustment AdjustmentsTop Pilots Adjustment Some models Burner Flame AdjustmentElectrical Requirements Connect Electricity to Gas CooktopCheck Operation Care, Cleaning and Maintenance for Cooktops When All Hookups are CompleteBefore You Call for Service Model and Serial Number LocationFigura DimensionEs DEL Hueco ModelO Mín MáxFigura 2 Deseño DEL Armario Recomendaciones de seguridad para unidades de superficie Notas importantes para el instaladorNotas importantes para el consumidor Extractores de aireArea para la toma de corriente algunos modelos FiguraPlancha de cocinar Fijacion de la unidadPlancha de cocinar 26 y Para liberar los quemadoresPlancha de cocinar 26 vea figura Provea un adecuado suministro de gasConexión del gas Plancha de cocinar 30 y 36 vea figuraConversión de gas propano/ licuado Conversión el regulador de presiónConversión de la válvula del quemador Vea figura 11 y figuraAjustes de obturador de aire del quemador AjustesPilotos superiores Algunos modelos Requisitos eléctricos Conexión de la electricidad al aparatoAjuste de entrada de aire de la superficie del quemador Ajuste de entrada de aire figuraVerifique la operación Verifique los dispositivos de encendido algunos modelosAntes de llamar al servicio técnico Cuando se han realizado todos los sistemas de conexiónLocalizacion del modelo y numero de serie Attencion señor propietarioPage Wiring Diagram Diagrama DE LA Instalación Alámbrica