Electrolux EKG5542, EKG5543 manual Replacing AN Oven Light Bulb

Page 21

REPLACING AN OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small Edison Screw.

Disconnect the appliance from the electricity supply before replacing the bulb.

1.Make sure the appliance is cool before replacing the bulb.

2.Open the door and remove the shelves and wirework runners.

3.Remove the glass cover by turning it to the left.

4.Unscrew the bulb by turning it to the left.

5.Fit a new bulb and then replace the glass bulb cover.

6.Refit the wirework runners and replace the oven shelves.

7.Restore the electricity supply.

Image 21

Contents Model EKG5542/EKG5543 Installation Important Safety InformationChild Safety Cleaning and MaintenanceContents SLIP-IN GAS Oven Description of the ApplianceFeatures Getting to Know Your ApplianceControl Panel Before Using the Appliance HOB Using the HOBTo Light the HOB Burners To Turn OFF ANY BurnerHints and Tips Things to NoteGrill Using the GrillGrill PAN and Handle Ensure the handle is correctly locatedPosition FoodGrill Time Mins in totalMain Oven Using the Main OvenHeat Zones PreheatingHints and Tips Cooking Chart Food Position GAS Approx MarkCook Time min Cooking Time Roasting ChartUsing Slow Cook Slow CookFood Preparation Slow Cooking Vegetables Cleaning Materials Care and CleaningCleaning the Outside of the Appliance Cleaning the Control Knobs and HandlesCleaning the HOB When Replacing Hotplate Burner PartsCleaning the Grill Aerosol cleaners must not be used on Stayclean surfaces Cleaning Inside the Grill and Oven CompartmentsCleaning Between the Outer and Inner Door Glass Cleaning the DoorsTo Replace the Outer Glass To Remove the Outer GlassReplacing AN Oven Light Bulb Problem Possible SolutionSomething not WORKING? Service and Spare Parts This guarantee does not cover Guarantee ConditionsTechnical Details Installation Instructions Important Safety RequirementsProvision for Ventilation Moving Your Appliance For Your SafetyLocation of Appliance Levelling the ApplianceConnecting to the Electricity Supply Connect to 230-240 A.C supply onlyIf a moulded plug is fitted Connecting to GAS Supply Pressure TestingFitting the Stability Chain Checking the Hotplate Checking the GrillChecking LID SHUT-OFF Device Checking the Main OvenPage Important Notice