Electrolux ES510 To Remove and Replace the Warming Drawer some models, To Remove Warming Drawer

Page 30

Setting Oven Controls

(Removing & Replacing Warming Drawer)

Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer drawer.

To Remove and Replace the Warming Drawer (some models)

To Remove Warming Drawer:

 

1.

Turn power OFF before removing the Warming Drawer.

 

2.

Open the drawer to the fully opened position.

 

3.

On the right glide you will find a shield attached with a hex-head screw

 

 

(See Fig. 1). Use a 1/4” socket and ratchet to remove the shield.

 

4.

Locate glide lever on each side of drawer, pull up on the left glide lever and

 

 

push down on the right glide lever.

 

5.

Pull the Warming Drawer away from the range.

Fig. 1

To Replace the Warming Drawer:

1.

Replace shield on the right glide of the drawer body.

 

 

2.

Pull the bearing glides to the front of the chassis glide (See Fig. 2).

 

3.

Align the glide on each side of the drawer with the glide slots on the range.

 

4.

Push the drawer into the range until levers “click” (approximately 2”). Pull

 

 

the drawer open again to seat bearing glides into position. If you do not

 

 

hear the levers “click” or the bearing glides do not feel seated

 

 

remove the drawer and repeat steps 2-4. This will minimize possible

 

 

damage to the bearing glides.

Fig. 2

NOTE: The Warming Drawer will NOT operate while in the Self-Clean and “Oven Lockout” modes

30

Image 30
Contents Setting Oven Controls 16-30 Self Cleaning 31-33 Important Safety InstructionsBefore Setting Oven Controls Setting Surface Controls General Care & Cleaning 34-38 Before You CallWelcome & Congratulations Register Your ProductImportant Safety Instructions Important Safety Notice Important Instructions for Usingyour CooktopImportant Instructions for Cleaning Your Range For CERAMIC-GLASS Cook TOP ModelsFeatures At a Glance Your Electric Range Features Include24 25 Before Setting Oven Controls Setting Surface Controls About the Ceramic Glass CooktopAbout the Radiant Surface Elements Available Esec Display Settings Recommended Surface Cooking SettingsElectronic Surface Element Control Esec Esec Lockout Feature Esec Hot Element Indicator Message HEEsec Error Indicator Message Er Single Radiant Elements some modelsBridge Radiant Element some models Dual Radiant Elements all modelsTo Operate the Dual Elements To Operate the Bridge Element some models Operating the Warming Zone some models Temperature SelectionSettings Table Food Item Heating Level To Set the Warming Zone Control some modelsSurface Cooking Using proper cookwareGeneral Care Cleaning section Cookware Material TypesArranging Warming Drawer Rack Positions Warming Drawer Temperature SelectionWarming Drawer Indicator Light To Operate the Warming DrawerControl Pad Features Minimum & Maximum Control Pad SettingsFunction follow later in this Use & Care Guide Instructions Press Display Setting Oven ControlsSetting the Clock To set the clock example below forTo set the Kitchen Timer example for 5 minutes Setting Continuous Bake or 12 Hour Energy SavingSetting Kitchen Timer To cancel the Kitchen Timer before the set time has run outInstructions PressdisplaySetting Silent Control Operation Setting Bake To set the Bake Temperature to 350FSetting Timed Bake When the Timed Bake finishesSetting Delayed Timed Bake When the set bake time runs outSetting Broil InstructionspressTips for Convection Bake Setting Convection BakeTo set the oven for Convection Bake and temperature to 350F Benefits of Convection BakeSetting Convection Roast Roasting Rack Instructions some modelsTo set the Convection Convert Feature Using the Favorite Settings Feature Refer to the Timed Bake or Delayed Timed Bake After completing a Timed Bake or Delayed Timed BakeTo set Keep Warm Setting the Sabbath Feature cont’dSetting the Keep Warm Feature To set Keep Warm to turn on automaticallyTo Remove and Replace the Warming Drawer some models To Remove Warming DrawerTo Replace the Warming Drawer Self-Cleaning Self-Cleaning OvenAdhere to the following cleaning precautions Instructions Press Display When the Self-Clean cycle is done Stopping or Interrupting a Self-Cleaning cycleTo adjust the oven temperature higher Adjusting Your Oven TemperatureCare & Cleaning To adjust the oven temperature lowerSurfaces How to Clean Stainless Steel, Chrome Control Panel, Decorative TrimOven Racks Oven door Plastic or foods with a high sugar content Cooktop Cleaning & MaintenanceCleaning Recommendations for the Ceramic Glass Cooktop For light to moderate soilSpecial Caution for Aluminum Use on the Ceramic Cooktop Removing & Replacing the Lift-Off Oven DoorDo not use the following on the ceramic glass cooktop To Remove Oven DoorOccurrence Possible CAUSE/SOLUTION Before You CallOven light does not work Limitedwarranty

ES510 specifications

The Electrolux ES510 is a state-of-the-art vacuum cleaner that combines innovative technology with user-friendly design, making it an essential tool for maintaining a clean and healthy home environment. This model showcases Electrolux's commitment to high performance and convenience, catering to the needs of modern households.

One of the standout features of the ES510 is its powerful suction capability, driven by a robust motor that delivers exceptional cleaning performance on a variety of surfaces. Whether it’s carpets, hardwood floors, or tiles, the ES510 adapts effortlessly, making quick work of dirt, dust, and debris. It boasts a multi-cyclonic filtration system that effectively separates dirt from the air, ensuring that only clean air is expelled back into your home, which is particularly beneficial for allergy sufferers.

Another noteworthy aspect of the Electrolux ES510 is its ergonomic design. The vacuum is lightweight and easy to maneuver, which reduces strain on the user during cleaning tasks. Its flexible hose and extendable wand make it possible to reach high corners and tight spaces with ease. The vacuum also features a convenient carry handle, making it simple to transport from one room to another.

Moreover, the ES510 is equipped with a range of tools and attachments that enhance its versatility. The crevice tool is perfect for reaching narrow spaces, while the dusting brush is ideal for cleaning delicate surfaces such as bookshelves and blinds. With the addition of a powered brush roll, users can experience improved performance on carpets, getting deeper into the fibers for a thorough clean.

The vacuum cleaner also boasts a bagless design, eliminating the need for disposable bags and making it more eco-friendly. The easy-to-empty dust container allows for quick disposal of collected dirt and debris, ensuring a hassle-free cleaning experience. Additionally, the HEPA filtration system captures 99.97% of particles, providing a better quality of air in your living space.

In conclusion, the Electrolux ES510 stands out as a powerful, user-friendly vacuum cleaner that integrates advanced technologies with practical features. Its exceptional suction, ergonomic design, and versatile attachments make it a reliable choice for anyone seeking an efficient cleaning solution. Whether tackling everyday messes or deep cleaning, the ES510 is designed to meet the diverse needs of modern households.