Electrolux 79902G manual Conversion to LPG, Replacing the injectors, Burner characteristics

Conversion to LPG

Replacing the injectors

1.Remove the pan supports.

2.Remove the burner caps and crowns.

3.Using a 7 mm socket spanner unscrew and remove the injectors, then replace them with the ones required for the new type of gas (see the table “Burner characteristics”).

4.Reassemble the parts, following the same procedure backwards.

5.Replace the Gas Type Label (located near the gas supply connection) with the one corresponding to the new type of gas. The label is supplied in the accessories plastic bag.

Should the feeding gas pressure be different or variable compared with the required pressure, an appropriate pressure regulator must be fitted on the gas supply pipe, in compliance with the rules in force.

Burner characteristics

GAS	BURNER	INJECTOR	NOMINAL	REDUCED	NOMINAL		FEEDING
TYPE	TYPE	REFERENCE	THERMAL	THERMAL	FLOW RATE		PRESSURE
		1/100 mm	POWER	POWER
					m3/h
			kW	kW		g/h	mbar
NATURAL	Rapid	119	2.9	0.65	0.276
GAS	Semirapid	96	1.9	0.45	0.181	-	20
(G 2 0 )	Auxiliary	70	1.0	0.33	0.095	-
LIQUID	Rapid	86	2.7	0.65	-	196
GAS
	Semirapid	71	1.9	0.45	-	138	28-30/37
(Butane/
	Auxiliary	50	1.0	0.33	-	73
Propane)

32