4.Touch the Decreasing Control 
to select the required type of gas.
5.After selecting the type of gas, switch off the hob touching the main ON/OFF Control 
.
6.Touch the main ON/OFF Control 
again to reactivate the hob.
The appliance is automatically set to the normal “User Mode”.
7.Light all the burners and adjust their flame to minimum, in order to check the flame stability (visual check).
8.At the same time, check the flame aspect (visual check).
If both the flame stability and the flame aspect are satisfactory, the setting of the hob for the new gas type is completed.
If the flame stability is not satisfactory, carry out an additional adjustment as described in the following paragraph.
Minimum flame adjustment
If the flame stability and the flame aspect are not satisfactory, proceed as follows:
1.Carry out the steps described in the paragraph “Setting the hob for the new gas type” - points 1, 2 and 3.
2.Light the burner to be adjusted following the instructions given in the paragraph “How to light a burner”.
The burner is automatically set to the minimum flame level.
3.If the flame minimum level is too low, the burner extinguishes. The hob automatically carries out a minimum level adjustment and then relights the burner.
34