Electrolux 79902G manual Building, 510

Building In

A	=	Auxiliary burner	SR
SR	=	Semirapid burner
R	= Rapid burner		SR

R

A

Dimensions are given

in millimetres

Fig. 1

510

730

The hob is designed to be inserted in modular kitchen units with depth of 550 - 600 mm and having proper characteristics.

The building-in is also possible in modular units with a 600 mm width: in this case, the cut-out in the work top must be carried out as shown in Fig. 2.

The worktop must be at least 30 mm thick.

If the worktop is thicker than 50 mm, it is possible to install the hob on modular units of any width.

Any unit (furniture unit, household appliance, etc..) placed near the unit which the hob is built in, shall not exceed the worktop height.

A minimum clearance of 100 mm between the cut-out in the worktop and any side wall exceeding the worktop height must be observed.

The hob dimensions and the cut-out dimensions are given in fig. 1 and 2.

A) Worktop Fig. 2

B)Removable Panel

36