Installation possibilities
Building over a kitchen unit with door
Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 5.
The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. See also Fig. 2.
The space behind the kitchen unit ("b") can be used for connections.
Dimensions are in mm
Building over a unit with an oven
The recesses for the hob and the oven must comply the indication given in Figs. 6 and must be provided with openings to allow a continuous supply of air.
Two possible solutions to avoid excessive overheating are described in Fig. 7 and 8.
The electrical connection for the hob and the oven must be carried out separately, for safety reasons and also to allow the oven to be easily removed from the unit, if necessary.
Fig. 5
a)removable panel
b)space for connections
38