- If touch control 
is selected, the burner automatically lights at medium flame level (three flame level indicators illuminate).
4.To adjust the burner flame level, use the
Increasing 
or Decreasing 
Touch Control.
The residual heat indicator 
lights up immediately after the burner is lit.
This means that the cooking zone is getting hot: the indicator remains on until the pan support and the burner have cooled down.
How to turn off a burner
1.To turn off a burner press the relevant Burner
Ignition Touch Control 
. All the flame level indicators go off.
The residual heat indicator remains on until the pan support and the burner have cooled down.
In case of ignition failure
The hob ignition device generates a series of small sparks for about 6 seconds.
If the flame does not light during this period, the gas flow to the burner is interrupted. After 3 seconds, the ignition device automatically repeats the ignition procedure for another 6 seconds.
After three failed ignition attempts, a safety device is set on the burner. The flame level indicators flash.
Caution! When the safety device is set on a burner, the burner controls cannot be operated for about 60 seconds.
9