Electrolux 316469104 installation instructions Burner sizes and cooktop locations

INSTALLATION INSTRUCTIONS FOR FREESTANDING GAS RANGE

PLEASE READ CAREFULLY! For personal safety, this product must be properly grounded.

Grounding Instructions

The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard

3-prong grounding wall receptacle to minimize the possibility of electric shock hazard from this appliance. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and polarized.

6.Assembly of the Surface Burner Heads, Burner Caps and Burner Grates:

It is very important to make sure that all of the Surface Burner Heads, Surface Burner Caps and Surface Burner Grates are installed correctly.

Your appliance was shipped with the burner heads and burner caps assembled in the correct locations (See Fig. 1).

Should you need to re-install the burner caps please refer to the Use & Care Guide for more information.

REMEMBER — DO NOT ALLOW SPILLS, FOOD, CLEANING

AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place whenever the surface burners are in use.

Burner sizes and cooktop locations

Where a standard two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded three-prong wall receptacle.

DONOT,UNDERANYCIRCUMSTANCES,CUTORREMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

3 4

1

1

2

Front of cooktop Fig. 1

1.2 Standard burners - 9,500 BTU.

2.Min-2-Max™ - double burner - 18,000 BTU.

3.Large burner - 14,000 BTU.

4.Perfect Simmer burner™- 5,000 BTU.

6