Frigidaire 316901300, CGGF3054KF important safety instructions Setting Oven Controls

Page 16

SETTING OVEN CONTROLS

To program oven for delay start time and to shut-off automatically

The delay start feature allows you to set a start and end time to the cooking process. Prior to setting a delay start, be sure the time of day is set correctly. If the delay start needs to be set more than 12 hours in advance (12-24 hours), the control must first be programmed for 24 hour display mode. See “Setting 12 or 24 hour display modes” section.

When the set bake time runs out:

1."END" will appear in the display window and the oven will shut-off automatically (See Fig. 2).

2.The control will beep 3 times every 30 seconds as a reminder until the cancel key pad is pressed.

WARNING

FOOD POISONING HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.

To program the oven for a delay start and to shut-off automatically (example for baking at 375°F for 50 minutes and starting at 5:30):

Step

Press

1. Press bake time.

2. Enter 50 mintues.

3. Press start.

4. Press delay start (See Fig. 1).

5. Enter 530.

6. Press and hold start.

7. Enter 375.

8. Press start.

Fig. 1

Fig. 2

NOTES

After the delay start feature has activated and started the cooking process, press the bake time pad to display the bake time remaining.

The delay start feature may be used with the convect or convect convert cooking features. Bake time will not operate when using the broil feature.

16

Image 16

Contents Use&Care Contents Product Record and RegistrationImportant Safety Instructions DefinitionsImportant Safety Instructions Important Instructions for Using Your Cooktop Grounding Instructions Conversion to Liquefied Petroleum GasFeatures AT a Glance Your gas range features includeBefore Setting Oven Controls To assemble the Effortless Oven Rack system Effortless Oven Rack systemSpecial dark coating on the left and right rack Before Setting Surface Controls Using proper cookwareCorrect flame setting Incorrect flame setting Set proper burner flame sizeSetting Surface Controls Setting surface controlsSetting a surface burner Seasoning, using and caring for the griddleFeature Min. temp. /time Max. temp. /time Minimum & maximum control settingsOven Control Functions Setting Oven Controls Setting the clockSetting 12 or 24 hour display modes Changing oven temperature displaySetting a silent control panel Setting oven lockoutSetting the minute timer Add a minute featureSetting quick preheat Setting bakeSetting bake time When the set bake time runs outSetting Oven Controls Convect bake all models Convect roast all modelsSetting convect convection convert Suggested broil settings table gas oven BroilTo set broil Step Press Close the oven doorSetting pizza feature Setting chicken nuggets featureSetting chicken nuggets feature cont’d Setting keep warmAdjusting the oven temperature Example increase the oven temperature by 30F Step PressExample decrease the oven temperature by 30F Step Press Operating the oven lightIf a timed bake or delayed timed bake is needed To Set the Sabbath Feature for use onBake time and delay start pads To Set the Sabbath Feature cont’d Self-cleaning SELF-CLEANINGAdhere to the following self-clean precautions When the self-clean cycle has completed VeryhotCare & Cleaning Cleaning recommendation tableCleaning the cooktop and surface burners To clean the burner head ignition portsTo clean the surface burner heads Replacing the oven lightTo remove oven door Removing and replacing the lift-off oven doorTo replace oven door Problem Solution Care & Cleaning sectionBefore YOU Call Solutions to common problems Major Appliance Warranty Disclaimer of Implied Warranties Limitation of Remedies