Sherwood R-872 manual Operations, Listening to a Program Source, Before operation

Page 31

Operations

■Notes:

•Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 18 for details about operation.

•Before operating this receiver, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to "OSD Menu Settings" on page 50.)

LISTENING TO A PROGRAM SOURCE

Before operation

3. Select the desired input source.

 

 

 

• Enter the standby mode.

• The POWER ON/STANDBY button lights up amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

• To switch the power off, push the POWER switch again.

Then the power is cut off and the POWER ON/STANDBY button goes off.

1. In the standby mode, turn the power on.

• Each time the "AUDIO" button on the front panel

is pressed, the input source changes as follows:

 

→ CD → AUX → TAPE

 

• Each time the "VIDEO" button on the front panel

 

is pressed, the input source changes as follows:

 

→ VIDEO 1→VIDEO 2→ - - - →VIDEO 4

 

• Each time the "TUNER" button is pressed, the

 

band changes as follows:

 

→ FM STEREO → FM MONO → AM → XM

 

■When selecting the EXTERNAL IN as desired,

• Each time the POWER ON/STANDBY button on the front panel is pressed, the receiver is turned on to enter the operating mode (the POWER ON/ STANDBY button lights up blue) or off to enter the standby mode(the POWER ON/STANDBY button lights up amber).

• On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

2. Switch the speakers on.

 

• Depending on the power amplifier setting for the

 

 

surround back channels and the surround back

 

 

• Then the SPEAKER indicator (

)

speaker setting, "EXT. IN" is displayed and 8(/7/6)

separate analog signals from the component

lights up and the sound can be heard

connected to this input pass through the volume

from the speakers connected to the

 

 

circuits only and can be heard from your

speaker terminals.

 

 

speakers.

• When using the headphones for private

• Select the desired input source to cancel the

listening, press the SPEAKER button

external in function.

again to switch the speakers off.

 

 

• These analog signals can be heard only, not

 

 

 

 

recorded.

ENGLISH

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Safety Instructions Read this Before Operating Your Unit IntroductionContents System Connections Connecting AntennasHdmi High Definition Multimedia Interface connection *1 Connecting Video ComponentsFlow of the video signals Component video input default settings *2Video conversion Audio conversion Flow of the audio signalsConnecting External INS Connecting Audio ComponentsConnecting PRE Outs Connecting Digital INS and OUTDigital input default settings Surround back speakers Connecting SpeakersFront Bi-Amp Connections Surround back left and right speakers Speaker placementFront left and right speakers and center speaker Surround left and right speakersConnecting XM only for North America Connecting Room 2 OutsConnecting MULTI-ROOM System KIT Connecting RF Remote AntennaAC Input Connecting DC Trigger OUTConnecting PC for Upgrades Switched AC OutletsFluorescent Display Front Panel ControlsAUX in Jack Setup MIC JackAbout the transmission signal Universal Remote ControlsFunction Table of the Numbered Buttons Remote Control Operation Range Entering a setup code Using Functions of Remote ControlSearching a setup code English Erasing all the commands programmed under a device mode Erasing the programmed command from one buttonTo erase a macro program Programming a macro functionTo change a macro program Programming a punch-through function Operating a macro functionErasing the programmed punch-through function Operating a punch-through functionThen VOL is displayed on the LCD screen for several seconds When RF is set to Changing the transmission signalRemote Control Operation Range Room 2 Remote ControlsLoading Battery Before operation When selecting the External in as desiredOperations Listening to a Program SourceMuting the sound When CD, AUX, Video 1~ 4 is selected as an input sourceAchieving higher purity of sound quality Listening with headphonesSurround modes Dolby Headphone Dolby Virtual SpeakerNeural Surround Dolby Digital + Enjoying Surround Sound2CH downmix mode Listening in Dolby Headphone modeAdjusting each channel level with test tone To cancel the surround mode for stereo operationChannel level Adjusting the current channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingTuning to preset stations Manual presettingSigning up for XM Satellite Radio XM Satellite Radio only for North AmericaDirect search Channel searchCategory search Displaying XM information Presetting channels Preset searchSignal strength display mode Error message and statusDubbing from video components onto RecordingVideo Digital Audio Recording with MD Recorder Displaying the audio information Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsWhen selecting the tuner as a Room 2 source When using the buttons on the remote control unitRoom 2 Source Playback When selecting the Room 2 volume When using the buttons on the front panelWhen selecting the Room 2 mode When selecting the Room 2 inputMulti OSD Menu SettingsConfirm your selection When selecting the items other than OSD Position Adjust Setting the System SetupWhen selecting the AMP Assign When selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Momentary OSD When selecting the Cinema EQWhen selecting the OSD Position Adjust When selecting the items other than Name Setting the Input SetupWhen selecting the menu of page 2 or When selecting the Audio Assign When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Video ModeWhen selecting the Video Scaling When selecting the Audio ModeWhen selecting the HD Audio When selecting the Auto SurroundWhen selecting the AV Sync When selecting the DC TriggerTo resume its factory input source name When selecting the NameWhen selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations When the auto setup has been completed When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Setting the CH Level Setup Memorizing the adjusted channel levels When selecting the Night Mode Setting the Sound ParameterWhen selecting the Dimension control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Center Width controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker Wide mode When selecting the Dolby Virtual SpeakerSetting the Multi Room Setup When adjusting the tone Bass and Treble When selecting the RoomWhen selecting the Input When selecting the VolumeProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsAOC Setup Code TableVCR VCR TV/VCR DVD SAT AUX-MD DKK

R-872 specifications

The Sherwood R-872 is a high-performance stereo receiver that offers an impressive combination of features, sound quality, and versatility, making it a valuable addition to any home audio system. Designed with an emphasis on audio fidelity and user convenience, the R-872 stands out as a reliable choice for both audiophiles and casual listeners alike.

One of the main features of the Sherwood R-872 is its robust power output, capable of delivering 100 watts per channel into 8 ohms. This level of power ensures that it can drive a wide range of speakers, from bookshelf models to larger floor-standing units, providing a rich and immersive listening experience. The receiver's built-in amplifier also supports low total harmonic distortion (THD) levels, which guarantees clear and accurate sound reproduction, even at high volumes.

The R-872 is equipped with a variety of connectivity options, making it easy to integrate into modern home entertainment setups. It includes multiple analog inputs for connecting various audio sources, such as CD players, turntables, and streaming devices. Additionally, it features built-in Bluetooth, allowing users to wirelessly stream music from smartphones, tablets, and computers, enhancing its versatility as a central component of any audio system.

Another noteworthy characteristic of the Sherwood R-872 is its sophisticated digital signal processing (DSP) capabilities. With multiple sound presets and adjustable equalization settings, users can tailor the audio output to their preferences, whether they are enjoying music, movies, or gaming. The receiver also offers a convenient headphone output, catering to those who prefer a private listening experience.

In terms of design, the R-872 boasts a sleek and modern aesthetic with an intuitive interface. The front panel features a clear display that provides essential information about the current audio source, volume level, and other settings. The included remote control allows for easy operation from a distance, adding to the overall user-friendly experience.

In summary, the Sherwood R-872 is a versatile and powerful stereo receiver that excels in delivering high-quality audio while accommodating a range of input sources and personal preferences. With its solid performance, modern features, and elegant design, the R-872 is an excellent choice for anyone looking to enhance their home audio setup. Whether you're listening to your favorite albums or enjoying a thrilling movie soundtrack, the R-872 ensures an engaging and enjoyable audio experience.
Top Page Image Contents