Sherwood R-772 Listening to Radio Broadcasts, Auto tuning, Manual tuning, Auto presetting

Page 30

R-772(G)2007.9.174:43PM페이지30

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning

1. Select the desired band.

•Each time this button is pressed, the band changes as follows :

→FM STereo → FM MONO → AM

("ST" lights up)

("ST" goes off)

•When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.

2. Press the TUNING UP(+)/DOWN(-) buttons for more than 0.5 second.

•The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and "TUNED".

•If the station found is not the desired one, simply repeat this operation.

•Weak stations are skipped during auto tuning.

Manual tuning

•Manual tuning is useful when you already know the frequency of the desired station.

•After selecting the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until the right frequency has been reached.

Auto presetting

•Auto presetting function automatically searches for FM stations only and store them in the memory.

•While listening to radio broadcasts, press and hold down the MEMORY/ENTER button for more than 2 seconds.

•Then "AUTO MEM" flickers and

this receiver starts auto presetting.

•Up to 30 FM stations can be stored.

�Notes:

•FM stations of weak strength cannot be memorized.

•To memorize AM stations or weak stations, preform "Manual presetting" procedure with using "Manual tuning" operation.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Audio/Video Receiver Introduction Read this Before Operating Your Unit220 240 Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting Audio Components Connecting External INSConnecting Subwoofer Preout Connecting Digital INS and OUTConnecting DC Trigger OUT Digital input default settingsConnecting Speakers Surround back speakersFront Bi-Amp Connections Surround left and right speakers Speaker placementFront left and right speakers and center speaker Surround back left and right speakersConnecting Room 2 Outs Connecting PC for UpgradesConnecting MULTI-ROOM System KIT Switched AC OutletAC Input Cord Front Panel Controls Fluorescent DisplaySetup MIC Jack AUX in JackUniversal Remote Controls Function Table of the Numbered Buttons Loading Batteries Using Functions of Remote Control Entering a setup codeUsing a punch-through function Removing a punch-through functionProgramming a macro function Operating a macro functionRoom 2 Remote Controls Remote Control Operation RangeLoading Battery Listening to a Program Source When selecting the External in as desiredOperations Before operationWhen CD, AUX, Video 1~ 4 is selected as an input source Listening with headphonesMuting the sound Surround modes Dolby Virtual Speaker Reference Enjoying Surround Sound Dolby DIGITAL, Dolby VS REF, Dolby VS WideTo cancel the surround mode for stereo operation Listening in Dolby Headphone modeAdjusting each channel level with test tone 2CH downmix modeAdjusting the current channel level Select the desired channelMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsManual presetting Tuning to preset stationsScanning preset stations in sequence Listening to RDS Broadcasts FM only RDS searchTP search PTY search DisplayOther Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the audio informationRoom 2 Source Playback Dubbing the audio and video signals separately onto Video RecordingRecording with Tape Dubbing from video components onto VideoOSD Menu Settings Multi772G2007.9.17443PM페이지39 Setting the System Setup When selecting the items other than OSD Position AdjustWhen selecting the AMP Assign When selecting the Subwoofer Mode When selecting the Hdmi Audio OUTWhen selecting the Tone Control When selecting the Cinema EQ When selecting the BackgroundWhen selecting the Momentary OSD When selecting the OSD Position Adjust Setting the Input Setup When selecting the items other than NameWhen selecting the menu of page 2 or When selecting the Video Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the AV Sync When selecting the Auto SurroundWhen selecting the Audio Remaster When selecting the DC TriggerWhen selecting the Name To resume its factory input source nameSetting the Speaker / Room EQ Setup When selecting the Auto SetupPreparations 772G2007.9.17443PM페이지49 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference Setting the Sound Parameter When selecting the Night ModeWhen selecting the Center Width control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker When selecting the Dolby Virtual Speaker Wide modeWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier SectionSetup Code Table Inno HIT VCR Otto Verand DVD SAT AUX-TAPE/MD
Related manuals
Manual 79 pages 32.11 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents