Sherwood R-772 manuel dutilisation 772G2007.9.17443PM페이지49

Page 49

R-772(G)2007.9.174:43PM페이지49

Continued

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the AUTO SETUP, then press the ENTER button.

ENGLISH

3. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the START, then press the ENTER button.

When the auto setup has been completed.

•Loud test tones are output successively and then if a series of auto setup procedure has been completed, "COMPLETED" will be displayed.

•To stop the auto setup procedure while performing it, press the ENTER button.

In such a case that the auto setup procedure is stopped before "COMPLETED" is displayed, the results of each adjustment may not be memorized.

•If there may be a problem with speaker or microphone connection, error message will be displayed. In this case, turn off the power, check the connection and then retry the auto setup procedure.

■Notes :

•Before starting auto setup, be sure not to set the HDMI AUDIO OUT to ON.

•Because the test tones are loud, ensure there no infants or small children in the room.

•For best results, ensure the room is as quiet as possible during the auto setup procedure. If there is too much ambient noise, the results may not be satisfactory.

4. To memorize the results, press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the APPLY, then press the ENTER button.

•Then the results are memorized and the SPEAKER/ ROOM EQ SETUP menu is displayed.

•Each time the CURSOR LEFT(◀)/ RIGHT(▶) buttons are pressed, the APPLY or the CANCEL is selected.

•When the CANCEL is selected, the results are not memorized.

•Check the results on each setup menu(SPEAKER CONFIGURATION menu on page 50, SPEAKER DISTANCE menu on page 51, SPEAKER CROSSOVER menu on page 52 and CH LEVEL SETUP menu for "CALIBRATE" mode on page 55).

•If the results are not satisfactory, you can retry the auto setup procedure or personalize your speaker setup and channel level setup by making the settings manually. (For details, refer to "When selecting the SPEAKER CONFIGURATION" on page 50, "When selecting the SPEAKER DISTANCE" on page 51, "When selecting the SPEAKER CROSSOVER" on page 52, "Adjusting each channel level with test tone" on page 27 and "Adjusting the current channel level" on page 28.)

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Audio/Video Receiver Read this Before Operating Your Unit Introduction220 240 Contents System Connections Connecting AntennasConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting External INS Connecting Audio ComponentsConnecting DC Trigger OUT Connecting Digital INS and OUTConnecting Subwoofer Preout Digital input default settingsSurround back speakers Connecting SpeakersFront Bi-Amp Connections Front left and right speakers and center speaker Speaker placementSurround left and right speakers Surround back left and right speakersConnecting PC for Upgrades Connecting Room 2 OutsSwitched AC Outlet Connecting MULTI-ROOM System KITAC Input Cord Fluorescent Display Front Panel ControlsAUX in Jack Setup MIC JackUniversal Remote Controls Function Table of the Numbered Buttons Loading Batteries Entering a setup code Using Functions of Remote ControlRemoving a punch-through function Using a punch-through functionOperating a macro function Programming a macro functionRemote Control Operation Range Room 2 Remote ControlsLoading Battery Operations When selecting the External in as desiredListening to a Program Source Before operationListening with headphones When CD, AUX, Video 1~ 4 is selected as an input sourceMuting the sound Surround modes Dolby Virtual Speaker Reference Dolby DIGITAL, Dolby VS REF, Dolby VS Wide Enjoying Surround SoundAdjusting each channel level with test tone Listening in Dolby Headphone modeTo cancel the surround mode for stereo operation 2CH downmix modeSelect the desired channel Adjusting the current channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsManual tuning Auto tuningAuto presetting Listening to Radio BroadcastsTuning to preset stations Manual presettingScanning preset stations in sequence RDS search Listening to RDS Broadcasts FM onlyTP search Display PTY searchAdjusting the brightness of the fluorescent display Operating the sleep timerOther Functions Displaying the audio informationRoom 2 Source Playback Recording Dubbing the audio and video signals separately onto VideoRecording with Tape Video Dubbing from video components ontoMulti OSD Menu Settings772G2007.9.17443PM페이지39 When selecting the items other than OSD Position Adjust Setting the System SetupWhen selecting the AMP Assign When selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Background When selecting the Cinema EQWhen selecting the Momentary OSD When selecting the OSD Position Adjust When selecting the items other than Name Setting the Input SetupWhen selecting the menu of page 2 or When selecting the Video Assign When selecting the Hdmi AssignWhen selecting the Video Mode When selecting the Audio AssignWhen selecting the Audio Remaster When selecting the Auto SurroundWhen selecting the AV Sync When selecting the DC TriggerTo resume its factory input source name When selecting the NameWhen selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations 772G2007.9.17443PM페이지49 When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference When selecting the Night Mode Setting the Sound ParameterWhen selecting the Panorama mode When selecting the Dolby Plii MusicWhen selecting the Center Width control When selecting the Dimension controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker Wide mode When selecting the Dolby Virtual SpeakerWhen selecting the Room Setting the Multi Room SetupWhen selecting the Input When selecting the VolumeProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsSetup Code Table Inno HIT VCR Otto Verand DVD SAT AUX-TAPE/MD
Related manuals
Manual 79 pages 32.11 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents