Sherwood R-772 manuel dutilisation Setting the CH Level Setup, Adjusting the current channel level

Page 55

R-772(G)2007.9.174:43PM페이지55

SETTING THE CH LEVEL SETUP

Memory mode

■Note :

• Depending on the speaker settings("NO", etc.), some channels cannot be selected.

Adjusting the current channel level

•You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CALIBRATE"), not into preset memory("REFERENCE 1", "REFERENCE 2").

•After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 27.)

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired channel.

■When adjusting the LFE LEVEL

①. Press the CURSOR UP(▲)/DOWN(▼)buttons to select the LFE LEVEL SETUP, then press the ENTER button.

②. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired program source.

2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the level of the selected channel or program source's LFE as desired.

• The LFE level can be adjusted within the range of -10 ~ 0 dB and other channel levels within the range of -15 ~ +15 dB

• In general, we recommend the LFE level to be adjusted to 0 dB.(However, the recommended LFE level for some early DTS software is -10 dB.) If the recommended levels seem too high, lower setting as necessary.

3. Repeat the above steps 1 and 2 to adjust each channel level.

ENGLISH

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Audio/Video Receiver Read this Before Operating Your Unit Introduction220 240 Contents System Connections Connecting AntennasConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting External INS Connecting Audio ComponentsDigital input default settings Connecting Digital INS and OUTConnecting DC Trigger OUT Connecting Subwoofer PreoutSurround back speakers Connecting SpeakersFront Bi-Amp Connections Surround back left and right speakers Speaker placementFront left and right speakers and center speaker Surround left and right speakersConnecting PC for Upgrades Connecting Room 2 OutsSwitched AC Outlet Connecting MULTI-ROOM System KITAC Input Cord Fluorescent Display Front Panel ControlsAUX in Jack Setup MIC JackUniversal Remote Controls Function Table of the Numbered Buttons Loading Batteries Entering a setup code Using Functions of Remote ControlRemoving a punch-through function Using a punch-through functionOperating a macro function Programming a macro functionRemote Control Operation Range Room 2 Remote ControlsLoading Battery Before operation When selecting the External in as desiredOperations Listening to a Program SourceListening with headphones When CD, AUX, Video 1~ 4 is selected as an input sourceMuting the sound Surround modes Dolby Virtual Speaker Reference Dolby DIGITAL, Dolby VS REF, Dolby VS Wide Enjoying Surround Sound2CH downmix mode Listening in Dolby Headphone modeAdjusting each channel level with test tone To cancel the surround mode for stereo operationSelect the desired channel Adjusting the current channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingTuning to preset stations Manual presettingScanning preset stations in sequence RDS search Listening to RDS Broadcasts FM onlyTP search Display PTY searchDisplaying the audio information Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsRoom 2 Source Playback Recording Dubbing the audio and video signals separately onto VideoRecording with Tape Video Dubbing from video components ontoMulti OSD Menu Settings772G2007.9.17443PM페이지39 When selecting the items other than OSD Position Adjust Setting the System SetupWhen selecting the AMP Assign When selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Background When selecting the Cinema EQWhen selecting the Momentary OSD When selecting the OSD Position Adjust When selecting the items other than Name Setting the Input SetupWhen selecting the menu of page 2 or When selecting the Audio Assign When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Video ModeWhen selecting the DC Trigger When selecting the Auto SurroundWhen selecting the Audio Remaster When selecting the AV SyncTo resume its factory input source name When selecting the NameWhen selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations 772G2007.9.17443PM페이지49 When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup When selecting the User mode Setting the CH Level Setup Reference When selecting the Night Mode Setting the Sound ParameterWhen selecting the Dimension control When selecting the Dolby Plii MusicWhen selecting the Panorama mode When selecting the Center Width controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker Wide mode When selecting the Dolby Virtual SpeakerWhen selecting the Volume Setting the Multi Room SetupWhen selecting the Room When selecting the InputProblem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsSetup Code Table Inno HIT VCR Otto Verand DVD SAT AUX-TAPE/MD
Related manuals
Manual 79 pages 32.11 Kb

R-772 specifications

The Sherwood R-772 is a versatile and powerful stereo receiver that appeals to audiophiles and casual listeners alike. This model, known for its robust performance and rich sound quality, is designed to meet the demands of modern audio systems while retaining classic features that enhance user experience.

One of the standout features of the Sherwood R-772 is its substantial power output. With the ability to deliver 100 watts per channel, this receiver can easily drive a wide range of speakers, providing dynamic and impactful audio that fills the room. This power output is complemented by its low total harmonic distortion, ensuring that the audio remains clean and detailed, even at higher volumes.

In terms of connectivity, the R-772 is equipped with multiple inputs for various audio sources. It includes several analog audio inputs, allowing users to connect their CD players, turntables, and other devices effortlessly. Additionally, the receiver supports AM/FM radio with a built-in tuner, providing access to a wide array of radio stations and programming. The inclusion of digital inputs enhances its compatibility with modern devices, ensuring an all-encompassing audio experience.

Another attractive feature of the Sherwood R-772 is its advanced surround sound processing. It supports various surround sound formats, enhancing the listening experience for movies and music. The inclusion of Dolby Pro Logic II allows users to enjoy stereo content in a multi-dimensional audio field, making movies and music come alive in their homes.

The R-772 is also designed with user convenience in mind. Its easy-to-navigate interface and remote control make it straightforward to operate, providing users with quick access to their favorite audio settings. The receiver also features a comprehensive equalization system, allowing users to personalize their listening experience and tailor the sound to their preferences.

Durability and build quality are characteristic of Sherwood products, and the R-772 is no exception. Its solid construction ensures longevity while maintaining aesthetic appeal. This model is designed to blend seamlessly with a home audio setup, offering both style and substance.

In conclusion, the Sherwood R-772 stereo receiver stands out with its powerful performance, versatile connectivity, and user-friendly features. It embodies a perfect balance of modern technology and traditional audio quality, ensuring that it remains a valuable addition to any audio system for years to come. This receiver is an excellent choice for anyone looking to enhance their listening experience, regardless of their level of audio expertise.
Top Page Image Contents